{"title":"Exhausts","description":null,"products":[{"product_id":"2022-current-toyota-tundra-titanium-axle-dump-exhaust-tip","title":"Nytop Titanium Axle Dump Exhaust Tip for Tundra (2022+)","description":"\u003cp data-start=\"172\" data-end=\"554\"\u003eUpgrade your Tundra’s performance and off-road capability with our \u003cstrong data-start=\"239\" data-end=\"278\"\u003eToyota Tundra Axle Dump Exhaust Tip\u003c\/strong\u003e, built from premium \u003cstrong data-start=\"299\" data-end=\"325\"\u003e3-inch titanium tubing\u003c\/strong\u003e. This lightweight, direct bolt-on upgrade replaces the factory rear axle-back section to deliver improved clearance, a more aggressive exhaust tone, and an impressive \u003cstrong data-start=\"493\" data-end=\"521\"\u003e15 lbs of weight savings\u003c\/strong\u003e—all without cutting or trimming.\u003c\/p\u003e\n\u003cp data-start=\"561\" data-end=\"582\"\u003e\u003cstrong data-start=\"563\" data-end=\"582\"\u003eImportant notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"586\" data-end=\"607\"\u003e\u003cstrong data-start=\"586\" data-end=\"605\"\u003eFits all trims.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-start=\"610\" data-end=\"677\"\u003e\n\u003cstrong data-start=\"610\" data-end=\"640\"\u003eDirect bolt-on replacement\u003c\/strong\u003e — no cutting or trimming required.\u003c\/li\u003e\n\u003cli data-start=\"680\" data-end=\"737\"\u003e\u003cstrong data-start=\"680\" data-end=\"735\"\u003eRemove the factory gasket ring before installation.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-start=\"740\" data-end=\"801\"\u003eReplaces the \u003cstrong data-start=\"753\" data-end=\"779\"\u003erear axle-back section\u003c\/strong\u003e of the OEM exhaust.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"808\" data-end=\"822\"\u003e\u003cstrong data-start=\"810\" data-end=\"822\"\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-start=\"826\" data-end=\"958\"\u003e\n\u003cstrong data-start=\"826\" data-end=\"859\"\u003e3-Inch Titanium Construction:\u003c\/strong\u003e Built from premium titanium tubing for durability, heat resistance, and lightweight performance.\u003c\/li\u003e\n\u003cli data-start=\"961\" data-end=\"1095\"\u003e\n\u003cstrong data-start=\"961\" data-end=\"994\"\u003eIncreased Off-Road Clearance:\u003c\/strong\u003e Axle-dump design eliminates the rear exit section for better departure angles and trail clearance.\u003c\/li\u003e\n\u003cli data-start=\"1098\" data-end=\"1189\"\u003e\n\u003cstrong data-start=\"1098\" data-end=\"1125\"\u003eEnhanced Exhaust Sound:\u003c\/strong\u003e Provides a deeper and more pronounced tone compared to stock.\u003c\/li\u003e\n\u003cli data-start=\"1192\" data-end=\"1288\"\u003e\n\u003cstrong data-start=\"1192\" data-end=\"1225\"\u003eSignificant Weight Reduction:\u003c\/strong\u003e Saves approximately \u003cstrong data-start=\"1246\" data-end=\"1256\"\u003e15 lbs\u003c\/strong\u003e over the OEM exhaust section.\u003c\/li\u003e\n\u003cli data-start=\"1291\" data-end=\"1384\"\u003e\n\u003cstrong data-start=\"1291\" data-end=\"1316\"\u003eBolt-On Installation:\u003c\/strong\u003e Installs easily using factory hardware—no modifications required.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NYTOP","offers":[{"title":"Default Title","offer_id":46615806050473,"sku":"T-TI","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/2Tundra_TitaniumAxleDumpExhaust_D5.png?v=1764099971"},{"product_id":"2024-current-toyota-tacoma-titanium-axle-dump-exhaust-tip","title":"Nytop Titanium Axle Dump Exhaust Tip for Tacoma (2024+)","description":"\u003cp data-end=\"539\" data-start=\"214\"\u003eUpgrade your Toyota Tacoma’s exhaust routing with a lightweight, high-clearance axle dump exhaust tip designed for improved off-road performance. Crafted from premium titanium tubing, this axle-back replacement increases clearance, enhances sound, and sheds weight—all while maintaining a simple, direct bolt-on installation.\u003c\/p\u003e\n\u003cp data-end=\"570\" data-start=\"546\"\u003e\u003cstrong data-end=\"568\" data-start=\"549\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"659\" data-start=\"573\"\u003e\n\u003cstrong data-end=\"596\" data-start=\"573\"\u003eRemove Gasket Ring:\u003c\/strong\u003e The factory gasket ring must be removed before installation.\u003c\/li\u003e\n\u003cli data-end=\"742\" data-start=\"662\"\u003e\n\u003cstrong data-end=\"681\" data-start=\"662\"\u003eDirect Bolt-On:\u003c\/strong\u003e No cutting or trimming required for non-Trailhunter trims.\u003c\/li\u003e\n\u003cli data-end=\"836\" data-start=\"745\"\u003e\n\u003cstrong data-end=\"771\" data-start=\"745\"\u003eTrailhunter Exception:\u003c\/strong\u003e Does \u003cstrong data-end=\"784\" data-start=\"777\"\u003enot\u003c\/strong\u003e replace the factory system on Trailhunter models.\u003c\/li\u003e\n\u003cli data-end=\"909\" data-start=\"839\"\u003e\n\u003cstrong data-end=\"861\" data-start=\"839\"\u003eHardware Included:\u003c\/strong\u003e All necessary mounting components are provided.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"933\" data-start=\"916\"\u003e\u003cstrong data-end=\"931\" data-start=\"919\"\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1072\" data-start=\"936\"\u003e\n\u003cstrong data-end=\"970\" data-start=\"936\"\u003ePremium Titanium Construction:\u003c\/strong\u003e Made with \u003cstrong data-end=\"1019\" data-start=\"981\"\u003e2.75-inch diameter titanium tubing\u003c\/strong\u003e for strength, heat resistance, and reduced weight.\u003c\/li\u003e\n\u003cli data-end=\"1210\" data-start=\"1075\"\u003e\n\u003cstrong data-end=\"1101\" data-start=\"1075\"\u003eHigh-Clearance Design:\u003c\/strong\u003e Axle dump configuration increases departure angle and minimizes risk of dragging the exhaust on the trail.\u003c\/li\u003e\n\u003cli data-end=\"1339\" data-start=\"1213\"\u003e\n\u003cstrong data-end=\"1232\" data-start=\"1213\"\u003eWeight Savings:\u003c\/strong\u003e Replaces the factory axle-back section and removes approximately \u003cstrong data-end=\"1309\" data-start=\"1298\"\u003e15 lbs.\u003c\/strong\u003e from the rear of the truck.\u003c\/li\u003e\n\u003cli data-end=\"1449\" data-start=\"1342\"\u003e\n\u003cstrong data-end=\"1368\" data-start=\"1342\"\u003eEnhanced Exhaust Tone:\u003c\/strong\u003e Produces a deeper, more refined sound compared to the factory muffler section.\u003c\/li\u003e\n\u003cli data-end=\"1566\" data-start=\"1452\"\u003e\n\u003cstrong data-end=\"1476\" data-start=\"1452\"\u003eNo Cutting Required:\u003c\/strong\u003e Installs using the existing factory mounting points for a clean, straightforward setup.\u003c\/li\u003e\n\u003cli data-end=\"1678\" data-start=\"1569\"\u003e\n\u003cstrong data-end=\"1593\" data-start=\"1569\"\u003eCorrosion Resistant:\u003c\/strong\u003e Titanium withstands harsh environments better than typical steel exhaust components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1709\" data-start=\"1685\"\u003e\u003cstrong data-end=\"1707\" data-start=\"1688\"\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1743\" data-start=\"1712\"\u003e\u003cstrong data-end=\"1741\" data-start=\"1712\"\u003eToyota Tacoma — All Trims\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-end=\"1806\" data-start=\"1746\"\u003e\n\u003cstrong data-end=\"1755\" data-start=\"1746\"\u003eNote:\u003c\/strong\u003e Direct replacement for non-Trailhunter trims only.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NYTOP","offers":[{"title":"Default Title","offer_id":46615809392809,"sku":"TM4-TI","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/2Tacoma_Exhaust_D5_NoVariant.png?v=1764100076"},{"product_id":"2024-current-lexus-gx550-toyota-land-cruiser-titanium-axle-dump-exhaust","title":"Nytop Titanium Axle Dump Exhaust for Land Cruiser \u0026 GX550 (2024+)","description":"\u003cp data-end=\"606\" data-start=\"258\"\u003eGive your Lexus GX550 or Toyota Land Cruiser LC250 a deeper, more refined exhaust tone with a modular axle dump system designed for perfect cross-platform compatibility. Featuring a proprietary flange system, this exhaust delivers noticeable sound gains, improved clearance, and a lightweight design—all while retaining OEM fitment and drivability.\u003c\/p\u003e\n\u003cp data-end=\"637\" data-start=\"613\"\u003e\u003cstrong data-end=\"635\" data-start=\"616\"\u003eImportant Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"752\" data-start=\"640\"\u003e\n\u003cstrong data-end=\"666\" data-start=\"640\"\u003eModular Flange System:\u003c\/strong\u003e Designed to fit both GX550 and LC250 using a proprietary adjustable exhaust flange.\u003c\/li\u003e\n\u003cli data-end=\"856\" data-start=\"755\"\u003e\n\u003cstrong data-end=\"781\" data-start=\"755\"\u003eGX550 Spacer Included:\u003c\/strong\u003e The included flange spacer is \u003cstrong data-end=\"839\" data-start=\"812\"\u003erequired only for GX550\u003c\/strong\u003e installations.\u003c\/li\u003e\n\u003cli data-end=\"968\" data-start=\"859\"\u003e\n\u003cstrong data-end=\"894\" data-start=\"859\"\u003eSound Increase Varies by Model:\u003c\/strong\u003e GX550 gains are more pronounced due to factory exhaust characteristics.\u003c\/li\u003e\n\u003cli data-end=\"1071\" data-start=\"971\"\u003e\n\u003cstrong data-end=\"995\" data-start=\"971\"\u003eNo Cutting Required:\u003c\/strong\u003e This section installs as a bolt-on replacement for the axle-back portion.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1095\" data-start=\"1078\"\u003e\u003cstrong data-end=\"1093\" data-start=\"1081\"\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"1232\" data-start=\"1098\"\u003e\n\u003cstrong data-end=\"1136\" data-start=\"1098\"\u003eProprietary Modular Flange Design:\u003c\/strong\u003e Allows a perfect, model-specific fit for both GX550 and LC250 using the same exhaust section.\u003c\/li\u003e\n\u003cli data-end=\"1263\" data-start=\"1235\"\u003e\n\u003cstrong data-end=\"1261\" data-start=\"1235\"\u003eEnhanced Exhaust Tone:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli data-end=\"1359\" data-start=\"1268\"\u003e\n\u003cstrong data-end=\"1278\" data-start=\"1268\"\u003eGX550:\u003c\/strong\u003e Increases exhaust volume by \u003cstrong data-end=\"1317\" data-start=\"1307\"\u003e15–20%\u003c\/strong\u003e, adding a deeper, more aggressive tone.\u003c\/li\u003e\n\u003cli data-end=\"1446\" data-start=\"1364\"\u003e\n\u003cstrong data-end=\"1374\" data-start=\"1364\"\u003eLC250:\u003c\/strong\u003e Increases exhaust volume by \u003cstrong data-end=\"1412\" data-start=\"1403\"\u003e5–10%\u003c\/strong\u003e, for a subtle but richer sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1476\" data-start=\"1449\"\u003e\n\u003cstrong data-end=\"1474\" data-start=\"1449\"\u003eMeasured Sound Gains:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli data-end=\"1559\" data-start=\"1481\"\u003e\n\u003cstrong data-end=\"1499\" data-start=\"1481\"\u003eGX550 Testing:\u003c\/strong\u003e ~\u003cstrong data-end=\"1510\" data-start=\"1501\"\u003e10 dB\u003c\/strong\u003e louder at idle, ~\u003cstrong data-end=\"1537\" data-start=\"1528\"\u003e15 dB\u003c\/strong\u003e louder at high RPM.\u003c\/li\u003e\n\u003cli data-end=\"1640\" data-start=\"1564\"\u003e\n\u003cstrong data-end=\"1582\" data-start=\"1564\"\u003eLC250 Testing:\u003c\/strong\u003e ~\u003cstrong data-end=\"1592\" data-start=\"1584\"\u003e5 dB\u003c\/strong\u003e louder at idle, ~\u003cstrong data-end=\"1618\" data-start=\"1610\"\u003e7 dB\u003c\/strong\u003e louder at high RPM.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1762\" data-start=\"1643\"\u003e\n\u003cstrong data-end=\"1679\" data-start=\"1643\"\u003eHigh-Clearance Axle Dump Layout:\u003c\/strong\u003e Increases departure angle and reduces risk of catching the exhaust on obstacles.\u003c\/li\u003e\n\u003cli data-end=\"1889\" data-start=\"1765\"\u003e\n\u003cstrong data-end=\"1791\" data-start=\"1765\"\u003eLightweight \u0026amp; Durable:\u003c\/strong\u003e Designed to reduce weight compared to the OEM axle-back while maintaining long-term durability.\u003c\/li\u003e\n\u003cli data-end=\"2000\" data-start=\"1892\"\u003e\n\u003cstrong data-end=\"1913\" data-start=\"1892\"\u003eOEM-Like Fitment:\u003c\/strong\u003e Bolts directly into factory mounting points for a clean, straightforward installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"2031\" data-start=\"2007\"\u003e\u003cstrong data-end=\"2029\" data-start=\"2010\"\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-end=\"2076\" data-start=\"2034\"\u003e\u003cstrong data-end=\"2074\" data-start=\"2034\"\u003e2024–Current Lexus GX550 — All Trims\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-end=\"2137\" data-start=\"2079\"\u003e\u003cstrong data-end=\"2135\" data-start=\"2079\"\u003e2024–Current Toyota Land Cruiser (LC250) — All Trims\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli data-end=\"2201\" data-start=\"2140\"\u003eDirect bolt-on replacement for the factory axle-back section\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NYTOP","offers":[{"title":"Default Title","offer_id":46615809818793,"sku":"GX550-TI","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/3LC250_Exhaust_D5.png?v=1764100076"},{"product_id":"2025-current-toyota-4runner-titanium-axle-dump-exhaust","title":"NYTOP Titanium Axle Dump Exhaust for 4Runner (2025+)","description":"\u003cp\u003eThe NYTOP Titanium Axle Dump Exhaust for the Toyota 4Runner is designed to improve off-road clearance, reduce weight, and enhance exhaust sound while maintaining a clean, bolt-on installation. Replacing the factory axle-back section, this axle dump configuration tucks the exhaust higher for improved departure clearance and delivers a deeper, more aggressive tone. Built from lightweight titanium and engineered with a modular flange design, it offers versatility and performance without permanent modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll trims compatible\u003c\/strong\u003e – Fits all Toyota 4Runner trims.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlatform-compatible design\u003c\/strong\u003e – Modular exhaust flange allows fitment on 4Runner, GX550, and LC250.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGX550 spacer\u003c\/strong\u003e – Included exhaust flange spacer is for GX550 only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle dump configuration\u003c\/strong\u003e – Improves clearance for off-road and trail use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e – Saves approximately 10–15 lbs compared to the factory axle-back section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced exhaust tone\u003c\/strong\u003e – Slightly deeper sound with moderate volume increase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium tubing\u003c\/strong\u003e – Constructed from 3-inch diameter titanium for strength and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eDirect bolt-on install\u003c\/span\u003e\u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e – No cutting or trimming required.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type\u003c\/strong\u003e – Axle dump exhaust (axle-back)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e – Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubing diameter\u003c\/strong\u003e – 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight savings\u003c\/strong\u003e – Approximately 10–15 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume increase\u003c\/strong\u003e – Approximately 5–10% over stock\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSound increase\u003c\/strong\u003e –\n\u003cul\u003e\n\u003cli\u003eIdle: +5 dB\u003c\/li\u003e\n\u003cli\u003eHigh RPM: +7 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eVehicle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eToyota 4Runner\u003c\/strong\u003e – (2025–Present)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NYTOP","offers":[{"title":"Default Title","offer_id":46656647397545,"sku":"GX550-TI","price":799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/3LC250_Exhaust_D5_49b3f212-d74d-4e72-930a-9065140187de.png?v=1764988957"},{"product_id":"2023-current-toyota-sequoia-titanium-axle-dump-exhaust-tip","title":"NYTOP Titanium Axle Dump Exhaust Tip Sequoia (2023+)","description":"\u003cp\u003eThe NYTOP Titanium Axle Dump Exhaust Tip for the Toyota Sequoia is designed to improve off-road clearance, reduce weight, and enhance exhaust sound in a clean, functional package. Replacing the factory rear axle-back section, this axle dump configuration tucks the exhaust up higher for improved departure clearance while delivering a deeper, more aggressive tone. Constructed from lightweight titanium, it offers meaningful performance and durability benefits without permanent modification.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant Notes\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll trims compatible\u003c\/strong\u003e – Fits all Toyota Sequoia trims.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGasket removal required\u003c\/strong\u003e – Factory gasket ring must be removed before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle dump design\u003c\/strong\u003e – Improves clearance for off-road and trail use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight construction\u003c\/strong\u003e – Saves approximately 13 lbs compared to the factory exhaust section.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced exhaust sound\u003c\/strong\u003e – Provides a deeper, more aggressive tone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTitanium tubing\u003c\/strong\u003e – Built from 3-inch diameter titanium for strength and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect bolt-on replacement\u003c\/strong\u003e – No cutting or trimming required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type\u003c\/strong\u003e – Axle dump exhaust tip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial\u003c\/strong\u003e – Titanium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTubing diameter\u003c\/strong\u003e – 3 inch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight savings\u003c\/strong\u003e – Approximately 13 lbs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation\u003c\/strong\u003e – Bolt-on, axle-back replacement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"NYTOP","offers":[{"title":"Default Title","offer_id":46656647626921,"sku":"SQ-TI","price":249.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/2Sequoia_Exhaust_D5.png?v=1764988957"},{"product_id":"toyota-4runner-fj-cruiser-gx460-exhaust-skid-plate","title":"Toyota 4Runner \/ FJ Cruiser \/ GX460 Exhaust Skid Plate","description":"\u003cp\u003eThe Toyota 4Runner \/ FJ Cruiser \/ Lexus GX460 Exhaust Skid Plate is constructed from high-quality laser-cut 1\/4\" (6 mm) aluminum, offering an excellent strength-to-weight ratio. Cleverly engineered to provide robust protection for the exhaust. Recommended for use as part of ASFIR's complete Toyota FJ Cruiser underbody protection set. \u003cbr\u003eFor Lexus GX460, it fits perfectly on the petrol 4.6L V8 model.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConstructed from 1\/4\" (6 mm) laser-cut aluminum for high strength with low added weight.\u003c\/li\u003e\n\u003cli\u003eSpecifically designed to shield the exhaust system during off-road adventures.\u003c\/li\u003e\n\u003cli\u003eDesigned to integrate seamlessly with the vehicle's chassis while minimizing ground clearance loss.\u003c\/li\u003e\n\u003cli\u003eBuilt with stiffening and reinforcing ribs for added structural durability.\u003c\/li\u003e\n\u003cli\u003eSecured directly to the chassis using zinc-coated steel brackets for long-term corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eIntegrated air vents help reduce heat build-up, and drain holes allow easy clearing of debris.\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on installation, no drilling or cutting required.\u003c\/li\u003e\n\u003cli\u003eAll necessary mounting hardware is included.\u003c\/li\u003e\n\u003cli\u003eTotal weight: 5 lb (2.2 kg).\u003c\/li\u003e\n\u003cli\u003eProudly made in Israel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ASFIR 4x4 USA","offers":[{"title":"Default Title","offer_id":46744621351081,"sku":"'558180","price":209.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/558180-1.jpg?v=1768869193"},{"product_id":"toyota-tacoma-exhaust-skid-plate","title":"Toyota Tacoma Exhaust Skid Plate","description":"\u003cp\u003eShield your Toyota Tacoma’s exhaust system with ASFIR’s precision-engineered aluminum skid plate, built for TRD, Off-Road, and Pro trims. Designed for maximum durability and minimal weight, this plate provides dependable protection against rocks, debris, and off-road hazards while maintaining ground clearance. Perfect as a standalone upgrade or part of ASFIR’s full underbody protection kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: High-quality laser-cut 1\/4\" (6 mm) aluminum for optimal strength-to-weight ratio.\u003c\/li\u003e\n\u003cli\u003eFits Tacoma TRD, Off-Road, and Pro trims.\u003c\/li\u003e\n\u003cli\u003eVehicle-specific design ensures perfect fitment with minimal clearance loss.\u003c\/li\u003e\n\u003cli\u003eIntegrated stiffening and reinforcing ribs for added durability.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on mounting to the chassis, no drilling or cutting required.\u003c\/li\u003e\n\u003cli\u003eZinc-coated steel brackets for corrosion-resistant support.\u003c\/li\u003e\n\u003cli\u003eVentilation slots reduce heat buildup, and drain holes allow easy debris and water removal.\u003c\/li\u003e\n\u003cli\u003eWeight: 6 lb (2.5 kg).\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary mounting hardware.\u003c\/li\u003e\n\u003cli\u003eProudly made in Israel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ASFIR 4x4 USA","offers":[{"title":"Default Title","offer_id":46744621678761,"sku":"'557182","price":289.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/557182-1.1.jpg?v=1768869194"},{"product_id":"toyota-tacoma-exhaust-skid-plate-1","title":"Toyota Tacoma Exhaust Skid Plate","description":"\u003cp\u003eThe Toyota Tacoma Exhaust Skid Plate is built from high-quality laser-cut 1\/4\" (6 mm) aluminum, delivering strong yet lightweight protection for the exhaust system, \u003cstrong\u003etested on Double Cab\u003c\/strong\u003e. Designed to fit the Tacoma’s structure with minimal clearance loss, it is recommended as part of Asfir's full underbody protection kit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTested on the Double Cab model.\u003c\/li\u003e\n\u003cli\u003eMade from laser-cut 1\/4\" (6 mm) aluminum for strength and low weight.\u003c\/li\u003e\n\u003cli\u003eProvides reliable protection for the exhaust system.\u003c\/li\u003e\n\u003cli\u003eStiffening ribs enhance durability and impact resistance.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on mounting to chassis with zinc-coated steel brackets.\u003c\/li\u003e\n\u003cli\u003eVentilation and drain openings reduce heat and allow debris removal.\u003c\/li\u003e\n\u003cli\u003eEasy bolt-on installation, no drilling or cutting required.\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hardware.\u003c\/li\u003e\n\u003cli\u003eWeighs 4 lb (2 kg).\u003c\/li\u003e\n\u003cli\u003eProudly made in Israel.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ASFIR 4x4 USA","offers":[{"title":"Default Title","offer_id":46744622301353,"sku":"'557180","price":229.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/557180-1.1.jpg?v=1768869194"},{"product_id":"toyota-tundra-2014-2021-5-7l-mpi-bullnose-exhaust-series","title":"Toyota Tundra, 2014-2021, 5.7L - MPI Bullnose Exhaust Series","description":"\u003cdiv dir=\"auto\" style=\"text-align: start;\"\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cdiv dir=\"auto\"\u003eThe all-new MPI Bullnoze exhaust series fits your 2014-2021 Tundra, providing a deep, Aggressive exterior sound while keeping the interior sound drone-free. The turn-down tips in front of the rear end look like a bull getting ready to charge! \u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003eThis series still gains those huge MPI Performance numbers. \u003cspan\u003eThis bolt-on emissions-legal system features all mandrel-bent tubing built right here in Montana\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cspan\u003e \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003eDyno Results:\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eTest vehicle dyno gains of 18 hp and 23 lb-ft at the rear wheels over stock @ 4,200 RPM. Most vehicles gain 2-4 MPG; these numbers are based on zero tuning, compared to stock trucks. \u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan\u003e\u003cb\u003eMuffler Options \u003c\/b\u003e \u003c\/span\u003e:\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003eMPI Performance series mufflers are going to be more aggressive-sounding\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003eQuality\u003c\/strong\u003e: MPI Exhaust Kits utilize high-quality 14-gauge.  Aluminized Tubing. This extra-thick tubing is proven to last in harsh environments, including road salts and rough gravel roads. It is perfectly protected with the best anti-rust coating mankind can make. Backed with our 3-Year Warranty, we stand behind what we build!\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003eNote\u003c\/strong\u003e: All our kits are produced for the longest wheelbase available for this truck. You may need to trim your kit; the complete instructions provide all the necessary measurements to ensure a perfect fit.  \u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003ePatented  Exhaust Pulse Chamber - Pat. 11713700\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hardware for an at-home installation\u003c\/li\u003e\n\u003cli\u003eUses factory hanger locations for easy installation\u003c\/li\u003e\n\u003cli\u003eNo In-Cab Droning, Guaranteed\u003c\/li\u003e\n\u003cli\u003e2-4 MPG Improvement \u003c\/li\u003e\n\u003cli\u003eDirect Fitment - Clamp Together \u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan data-offset-key=\"44nc7-0-0\"\u003e? Fits \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-offset-key=\"44nc7-0-0\"\u003eMake: Toyota \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-offset-key=\"44nc7-0-0\"\u003eYear: 2014  - 2021\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-offset-key=\"44nc7-0-0\"\u003eChassis: Tundra \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-offset-key=\"44nc7-0-0\"\u003eEngine: 5.7L \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan data-offset-key=\"44nc7-0-0\"\u003eWheel Base: This kit is compatible with all wheelbases and includes all the necessary parts for a home installation. \u003c\/span\u003e \u003cspan data-offset-key=\"44nc7-0-0\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003c\/div\u003e","brand":"MPI Exhaust Technologies","offers":[{"title":"Default Title","offer_id":46793025257641,"sku":"T224-TDPSBN-C","price":415.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/Toyota_Tundra_2014-2021_5.7L_BNZ_1_f612618f-2616-45c7-8320-c94ced79a7a8.jpg?v=1770653071"},{"product_id":"toyota-tacoma-2005-2023-v6-mpi-bullnoze-exhaust-series","title":"Toyota Tacoma, 2005-2023, V6 - MPI Bullnoze Exhaust Series","description":"\u003cp\u003eThe all-new MPI Bullnoze exhaust series is specifically designed for 2005-2023 Tacoma trucks, offering a deep, aggressive exterior sound while maintaining a drone-free interior. This system features turn-down tips in front of the rear axle, looking for a bull ready to charge. Here are the key details:\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMandrel-Bent Construction\u003c\/strong\u003e: Ensures smooth exhaust flow for enhanced performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePatented Exhaust Pulse Chamber\u003c\/strong\u003e: Enhances exhaust flow and performance (Patent No. 11713700).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo In-Cab Droning\u003c\/strong\u003e: Guaranteed to eliminate unwanted interior noise.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Fuel Efficiency\u003c\/strong\u003e: Provides a 2-4 MPG improvement without the need for ECM tuning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect Fitment\u003c\/strong\u003e: Uses factory hanger locations for easy and secure installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Kit\u003c\/strong\u003e: Includes all necessary hardware and detailed instructions for home installation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurn-Down Tips\u003c\/strong\u003e: Positioned in front of the rear axle for a unique and aggressive look.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMuffler Options:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPI Performance Series Mufflers\u003c\/strong\u003e: Offers a more aggressive, sporty sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits All Wheelbases\u003c\/strong\u003e: The kit is designed for the longest wheelbase available for the truck. Some trimming may be required; complete instructions will be provided.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-On System\u003c\/strong\u003e: Allows for straightforward installation without welding. Clamps directly onto the factory pipe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMake\u003c\/strong\u003e: Toyota \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYear\u003c\/strong\u003e: 2005 - 2023\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis\u003c\/strong\u003e: Tacoma\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEngine\u003c\/strong\u003e: 3.6L \u0026amp; 4.0L \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheelbase\u003c\/strong\u003e: Fits all wheelbases with necessary parts included for customization.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDyno Results:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFuel Efficiency Gains\u003c\/strong\u003e: Most vehicles see an improvement of 2-4 MPG over stock with no tuning required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe MPI Bullnoze exhaust series combines a bold, aggressive sound with significant performance gains and easy installation, making it an ideal upgrade for Tacoma truck owners seeking a distinctive exhaust note and improved fuel efficiency.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eInstructions: \u003c\/b\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0550\/0151\/4028\/files\/T0-4_1556422a-7671-4bc2-bf16-7caa06496879.pdf?v=1768849697\" title=\"Tacoma MPI Bullnoze Instructions\"\u003eT0-4 Instructions \u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!----\u003e","brand":"MPI Exhaust Technologies","offers":[{"title":"Default Title","offer_id":46793025290409,"sku":"T024-TDPSBN-C","price":399.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/IMG_1236.png?v=1770653072"},{"product_id":"toyota-tundra-2007-2013-5-7l-weld-on-mpi-exhaust-cat-back-dual-exhaust-kits","title":"Toyota Tundra, 2007-2013, 5.7L, Weld\/On - MPI Exhaust Cat-Back Dual Exhaust Kits","description":"\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\" dir=\"auto\" data-mce-style=\"text-align: start;\"\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eThis MPI Exhaust Tech. Cat-back for 2007-2013 tundra Gives you the chose of Sound option to fit your style without that drone! While still gaining those huge MPI Performance Numbers, \u003cspan data-mce-fragment=\"1\"\u003eThis weld-on emissions-legal system features all mandrel-bent build right here in Montana\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e. This kit Fits all wheelbase tundra with all parts necessary for that home installer.   \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDyno Results :\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eTest vehicle dyno gains of 18 hp and 23 lb-ft at the rear wheels over stock @ 4,500 RPM. Most Vehicle gaining 2 - 4 MPG , these number are with zero tuning, Vs Stock truck.  \u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eMuffler Options \u003c\/b\u003e \u003c\/span\u003e:\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eMPI Turbo series mufflers are going to have a nice mellow sound,    \u003ca data-mce-fragment=\"1\" title=\"YouTube - Turbo Series\" href=\"https:\/\/www.youtube.com\/watch?v=QfIPpkQeD7w\" target=\"_blank\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=QfIPpkQeD7w\"\u003e( VIDEO )\u003c\/a\u003e   \u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eMPI Performance series mufflers are going to be more aggressive sounding    \u003ca data-mce-fragment=\"1\" title=\"MPI Performance Series\" href=\"https:\/\/www.youtube.com\/watch?v=1pwDlJdFp2c\u0026amp;t=2s\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=FjhKM5rqLEk\"\u003e(VIDEO\u003c\/a\u003e)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eQuality\u003c\/strong\u003e: MPI Exhaust Kits uses the highest quality 14 Ga. Tubing, this extra thick tubing is proven to last in those harsh environments, including everything road salts to those rough gravel roads. Perfectly protected with the best anti-rust coating mankind can make. Backed with our 3 Year Warranty, we stand behind what we Build !\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eNote\u003c\/strong\u003e: All our kits are produced for the longest wheelbase available for this truck. You may need to trim your kit, and the complete instructions provide all the necessary measurements to make it a perfect fit.  \u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePatented  Exhaust Pulse Chamber - Pat. 11713700\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes all necessary hardware for an at home installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUses factory hanger locations for easy installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo In-Cab Droning, Guaranteed\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-4 MPG Improvement \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect Fitment - Clamp Together \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy Installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eClears the Factory Spare Tire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003e? Fits \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eMake : Toyota \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eYear : 2007  - 2013\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eChassis : Tundra\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eEngine : 5.7L\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eWheel Base : This kit Fits all wheelbase with all parts necessary for that home installer. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0550\/0151\/4028\/deleted\/files\/3Y-limited-warranty-EN_100x100.png?v=1703707643\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0550\/0151\/4028\/deleted\/files\/3Y-limited-warranty-EN_100x100.png?v=1703707643\"\u003e\u003c\/span\u003e\u003c\/div\u003e","brand":"MPI Exhaust Technologies","offers":[{"title":"T121-Behind Tire - W \/ MPI Performance series \/ Powder coated Black","offer_id":46793025716393,"sku":"T121-BTPSBLK-W","price":625.95,"currency_code":"USD","in_stock":false},{"title":"T121-Behind Tire - W \/ MPI Performance series \/ Polished Bright Chrome","offer_id":46793025749161,"sku":"T121-BTPSCM-W","price":625.95,"currency_code":"USD","in_stock":false},{"title":"T121-Behind Tire - W \/ MPI Turbo series \/ Powder coated Black","offer_id":46793025781929,"sku":"T121-BTTBBLK-W","price":625.95,"currency_code":"USD","in_stock":false},{"title":"T121-Behind Tire - W \/ MPI Turbo series \/ Polished Bright Chrome","offer_id":46793025814697,"sku":"T121-BTTBCM-W","price":625.95,"currency_code":"USD","in_stock":false},{"title":"T122-Under Bumper - W \/ MPI Performance series \/ Powder coated Black","offer_id":46793025847465,"sku":"T122-UBPSBLK-W","price":625.95,"currency_code":"USD","in_stock":false},{"title":"T122-Under Bumper - W \/ MPI Performance series \/ Polished Bright Chrome","offer_id":46793025880233,"sku":"T122-UBPSCM-W","price":625.95,"currency_code":"USD","in_stock":false},{"title":"T122-Under Bumper - W \/ MPI Turbo series \/ Powder coated Black","offer_id":46793025913001,"sku":"T122-UBTBBLK-W","price":625.95,"currency_code":"USD","in_stock":false},{"title":"T122-Under Bumper - W \/ MPI Turbo series \/ Polished Bright Chrome","offer_id":46793025945769,"sku":"T122-UBTBCM-W","price":625.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/Toyota_Tundra_2007-2013_5.7L_Weld-On_BLK_BT_6c577801-50d2-426f-89b5-1d3fa30ebaa1.jpg?v=1770653072"},{"product_id":"toyota-tacoma-1995-2004-v6l-weld-on-mpi-exhaust-cat-back-dual-exhaust-kits","title":"Toyota Tacoma, 1995-2004, V6L, Weld\/On - MPI Exhaust Cat-Back Dual Exhaust Kits","description":"\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eMake That Toyota - Tacoma sound and perform the way it should by increasing the exhaust flow and enhancing overall power.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eMore power means you don't have to mash the go pedal as hard, and as a benefit, you will see a 2-4 mile per gallon increase on the highway.\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eSound\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e:\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eMPI Turbo series\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eare going to have a nice mellow sound, with a slightly higher noise level than stock with a lower tone, making it sound like a truck instead of a Hoover vacuum. Guaranteed to have no in cab droning. \u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eMPI Performance will provide a Aggressive Exteriors sound \u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eQuality\u003c\/strong\u003e: MPI Exhaust Kits uses the highest quality 14 Ga. Tubing, this extra thick tubing is proven to last in those harsh environments, including everything road salts to those rough gravel roads. Perfectly protected with the best anti-rust coating mankind can make. Backed with our 3 Year Warranty, we stand behind what we Build !\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eNote\u003c\/strong\u003e: All our kits are produced for the longest wheelbase available for this truck. You may need to trim your kit, and the complete instructions provide all the necessary measurements to make it a perfect fit. All hardware is provided to completely assemble this weld together kits\u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePatented  Exhaust Pulse Chamber - Pat. 11713700\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo In-Cab Droning, Guaranteed\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-4 MPG Improvement\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved Performance \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEnhanced Exterior Sound\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect Fitment\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e3 Year Limited Warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003e? Fits All - Toyota Tacoma 1995-2004 3.4L Truck \u003c\/span\u003e\u003c\/p\u003e","brand":"MPI Exhaust Technologies","offers":[{"title":"T021-Behind Tire-W \/ MPI Performance Series \/ Powder coated Black","offer_id":46793025585321,"sku":"T021-BTPSBLK-W","price":575.0,"currency_code":"USD","in_stock":false},{"title":"T021-Behind Tire-W \/ MPI Performance Series \/ Polished Bright Chrome","offer_id":46793025618089,"sku":"T021-BTPSCM-W","price":575.0,"currency_code":"USD","in_stock":false},{"title":"T021-Behind Tire-W \/ MPI Turbo Series \/ Powder coated Black","offer_id":46793025650857,"sku":"T021-BTTBBLK-W","price":575.0,"currency_code":"USD","in_stock":false},{"title":"T021-Behind Tire-W \/ MPI Turbo Series \/ Polished Bright Chrome","offer_id":46793025683625,"sku":"T021-BTTBCHM-W","price":575.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/Toyota_Tacoma_1995-2004_V6_Weld-On_BLK_BT_ddfea9ab-60e8-4ef9-87a2-6232f0dd9f50.jpg?v=1770653072"},{"product_id":"toyota-tundra-2014-2021-5-7l-weld-on-mpi-exhaust-cat-back-dual-exhaust-kits","title":"Toyota Tundra, 2014-2021, 5.7L, Weld\/On - MPI Exhaust Cat-Back Dual Exhaust Kits","description":"\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cdiv dir=\"auto\" style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eThis MPI Exhaust Tech. Cat-back for 2014-2021 tundra Gives you the chose of Sound option to fit your style without that drone! While still gaining those huge MPI Performance Numbers, \u003cspan data-mce-fragment=\"1\"\u003eThis weld-on emissions-legal system features all mandrel-bent build right here in Montana\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e. This kit Fits all wheelbase tundra with all parts necessary for that home installer.   \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDyno Results :\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eTest vehicle dyno gains of 18 hp and 23 lb-ft at the rear wheels over stock @ 4,500 RPM. Most Vehicle gaining 2 - 4 MPG , these number are with zero tuning, Vs Stock truck.  \u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cb\u003eMuffler Options \u003c\/b\u003e \u003c\/span\u003e:\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eMPI Turbo series mufflers are going to have a nice mellow sound,    \u003ca href=\"https:\/\/www.youtube.com\/watch?v=QfIPpkQeD7w\" title=\"YouTube - Turbo Series\" target=\"_blank\"\u003e( VIDEO )\u003c\/a\u003e   \u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eMPI Performance series mufflers are going to be more aggressive sounding    \u003ca href=\"https:\/\/www.youtube.com\/watch?v=1pwDlJdFp2c\u0026amp;t=2s\" title=\"MPI Performance Series\"\u003e(VIDEO\u003c\/a\u003e)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eQuality\u003c\/strong\u003e: MPI Exhaust Kits uses the highest quality 14 Ga. Tubing, this extra thick tubing is proven to last in those harsh environments, including everything road salts to those rough gravel roads. Perfectly protected with the best anti-rust coating mankind can make. Backed with our 3 Year Warranty, we stand behind what we Build !\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eNote\u003c\/strong\u003e: All our kits are produced for the longest wheelbase available for this truck. You may need to trim your kit, and the complete instructions provide all the necessary measurements to make it a perfect fit.  \u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePatented  Exhaust Pulse Chamber - Pat. 11713700\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes all necessary hardware for an at home installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUses factory hanger locations for easy installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo In-Cab Droning, Guaranteed\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-4 MPG Improvement \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect Fitment - Clamp Together \u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003cli\u003eClears the Factory Spare Tire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003e? Fits \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eMake : Toyota \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eYear : 2014  - 2021\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eChassis : Tundra\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eEngine : 5.7L\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eWheel Base : This kit Fits all wheelbase with all parts necessary for that home installer. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0550\/0151\/4028\/deleted\/files\/3Y-limited-warranty-EN_100x100.png?v=1703707643\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003c\/div\u003e","brand":"MPI Exhaust Technologies","offers":[{"title":"Behind Tire - W \/ MPI Performance series \/ Powder coated Black","offer_id":46793025323177,"sku":"T221-BTPSBLK","price":625.95,"currency_code":"USD","in_stock":false},{"title":"Behind Tire - W \/ MPI Performance series \/ Polished Bright Chrome","offer_id":46793025355945,"sku":"T221-BTPSCM","price":625.95,"currency_code":"USD","in_stock":false},{"title":"Behind Tire - W \/ MPI Turbo series \/ Powder coated Black","offer_id":46793025388713,"sku":"T221-BTTBBLK","price":625.95,"currency_code":"USD","in_stock":false},{"title":"UnderBumper - W \/ MPI Performance series \/ Powder coated Black","offer_id":46793025421481,"sku":"T222-UBPSBLK","price":625.95,"currency_code":"USD","in_stock":false},{"title":"UnderBumper - W \/ MPI Performance series \/ Polished Bright Chrome","offer_id":46793025454249,"sku":"T222-UBPSCM","price":625.95,"currency_code":"USD","in_stock":false},{"title":"Behind Tire - W \/ MPI Turbo series \/ Polished Bright Chrome","offer_id":46793025487017,"sku":"T221-BTTBCM","price":625.95,"currency_code":"USD","in_stock":false},{"title":"UnderBumper - W \/ MPI Turbo series \/ Powder coated Black","offer_id":46793025519785,"sku":"T222-UBTBBLK","price":625.95,"currency_code":"USD","in_stock":false},{"title":"UnderBumper - W \/ MPI Turbo series \/ Polished Bright Chrome","offer_id":46793025552553,"sku":"T222-UBTBCM","price":625.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/Toyota_Tundra_2014-2021_5.7L_Weld-On_BLK_BT_e52a52eb-3774-44d7-bb1d-2bffc84034bd.jpg?v=1770653072"},{"product_id":"toyota-tacoma-2005-2023-v6-stainless-truck-cat-back-dual-exhaust-kits","title":"Toyota Tacoma, 2005-2023, V6, Stainless - Truck Cat-Back Dual Exhaust Kits","description":"\u003cp\u003e\u003cstrong\u003eMPI Exhaust Kit for Toyota Tacoma\u003c\/strong\u003e\u003cbr\u003eThe MPI Exhaust Kit is a cat-back exhaust system specifically engineered for Toyota trucks and equipped with all V-6 engines to enhance overall vehicle performance. This kit improves horsepower, torque, and fuel efficiency, verified through extensive dyno testing. Designed for easy installation, it leverages 35 years of exhaust experience and includes all necessary hardware for a hassle-free setup. Additionally, it is 50-state Emission Compliant and does not void any vehicle warranties.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003ePatented Pulse Chamber Technology: Our PCT eliminates all in-cab drones, Even while towing!! backed with our Guaranteed No Drone.\u003cbr\u003eHigh-Quality Materials: The MPI Stainless kit features 409 durable stainless components, including hangers, clamps, tubing, and mufflers, with 304 stainless tips.\u003cbr\u003eEasy Installation: No welding is needed. It uses factory hanger locations and includes detailed trimming instructions to accommodate all wheelbases.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePerformance Benefits\u003c\/strong\u003e\u003cbr\u003eHorsepower Gains: + 6.49 hp at 5,300 RPM\u003cbr\u003eTorque Gains: +6.75 lb-ft at 5,300 RPM\u003cbr\u003eFuel Efficiency: Average improvement of 2-4 MPG\u003cbr\u003eSound Quality: Aggressive yet refined exhaust tone with no in-cab droning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cbr\u003eMake: Toyota\u003cbr\u003eModel Years: 2005-2023\u003cbr\u003eChassis: Tacoma\u003cbr\u003eEngine: 3.5L \u0026amp; 4.0L\u003cbr\u003eWheelbase: Compatible with all wheelbases\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDetailed Specifications\u003c\/strong\u003e\u003cbr\u003eMaterial: 409 Stainless\u003cbr\u003eInstallation: Clamp-together system, direct fitment to factory hanger locations.\u003cbr\u003eHardware: Includes all necessary hardware for installation.\u003cbr\u003eTubing Size: Dyno-proven optimal size for performance.\u003cbr\u003eTips: Large 3.5\" x 12\" long 304 Stainless tips for a refined appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePatented Technology\u003c\/strong\u003e\u003cbr\u003eExhaust Pulse Chamber (Pat. 11713700): Guaranteed no drone and optimizes exhaust flow and overall performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarranty\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStainless Warranty: Limited Lifetime Warranty\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstructions: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0550\/0151\/4028\/files\/T0-12-SS.pdf?v=1762284445\"\u003eT0-12-SS\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MPI Exhaust Technologies","offers":[{"title":"T021-Behind Tire-SS \/ MPI Performance Series - Polished Stainless \/ Powder coated Black","offer_id":46793025978537,"sku":"T021-BTPSBLK-SS","price":875.0,"currency_code":"USD","in_stock":false},{"title":"T021-Behind Tire-SS \/ MPI Performance Series - Polished Stainless \/ Polished Stainless","offer_id":46793026011305,"sku":"T021-BTPSCM-SS","price":875.0,"currency_code":"USD","in_stock":false},{"title":"T021-Behind Tire-SS \/ MPI Turbo Series - Polished Stainless \/ Powder coated Black","offer_id":46793026044073,"sku":"T021-BTTBBLK-SS","price":875.0,"currency_code":"USD","in_stock":false},{"title":"T021-Behind Tire-SS \/ MPI Turbo Series - Polished Stainless \/ Polished Stainless","offer_id":46793026076841,"sku":"T021-BTTBCM-SS","price":875.0,"currency_code":"USD","in_stock":false},{"title":"T022-Under Bumper-SS \/ MPI Performance Series - Polished Stainless \/ Powder coated Black","offer_id":46793026109609,"sku":"T022-UBPSBLK-SS","price":875.0,"currency_code":"USD","in_stock":false},{"title":"T022-Under Bumper-SS \/ MPI Performance Series - Polished Stainless \/ Polished Stainless","offer_id":46793026142377,"sku":"T022-UBPSCHM-SS","price":875.0,"currency_code":"USD","in_stock":false},{"title":"T022-Under Bumper-SS \/ MPI Turbo Series - Polished Stainless \/ Powder coated Black","offer_id":46793026175145,"sku":"T022-UBTBBLK-SS","price":875.0,"currency_code":"USD","in_stock":false},{"title":"T022-Under Bumper-SS \/ MPI Turbo Series - Polished Stainless \/ Polished Stainless","offer_id":46793026207913,"sku":"T022-UBTBCHM-SS","price":875.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/Tacoma_BLK_BT-SS-2.jpg?v=1770653072"},{"product_id":"toyota-tundra-2014-2021-5-7l-clamp-on-mpi-exhaust-cat-back-dual-exhaust-kits","title":"Toyota Tundra, 2014-2021, 5.7L, Clamp\/On - MPI Exhaust Cat-Back Dual Exhaust Kits","description":"\u003cdiv data-mce-fragment=\"1\" style=\"text-align: start;\" dir=\"auto\" data-mce-style=\"text-align: start;\"\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eThis MPI Exhaust Tech. Cat-back for 2014-2021 Toyota Tundra Gives you the chose of Sound option to fit your style without that drone! While still gaining those huge MPI Performance Numbers, \u003cspan data-mce-fragment=\"1\"\u003eThis bolt-on emissions-legal system features all mandrel-bent build right here in Montana\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e. This kit Fits all wheelbase Tundra with all parts necessary for that home installer.   \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eDyno Results :\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003eTest vehicle dyno gains of 18 hp and 23 lb-ft at the rear wheels over stock @ 4,200 RPM. Most Vehicle gaining 2 - 4 MPG , these number are with zero tuning, Vs Stock truck. \u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eMuffler Options \u003c\/b\u003e \u003c\/span\u003e:\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eMPI Turbo series mufflers are going to have a nice mellow sound,    \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.youtube.com\/watch?v=QfIPpkQeD7w\" title=\"YouTube - Turbo Series\" target=\"_blank\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=QfIPpkQeD7w\"\u003e( VIDEO )\u003c\/a\u003e   \u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003eMPI Performance series mufflers are going to be more aggressive sounding    \u003ca data-mce-fragment=\"1\" href=\"https:\/\/www.youtube.com\/watch?v=FjhKM5rqLEk\" title=\"MPI Performance Series\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=FjhKM5rqLEk\"\u003e(VIDEO\u003c\/a\u003e)\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eQuality\u003c\/strong\u003e: MPI Exhaust Kits uses the highest quality 14 Ga. Tubing, this extra thick tubing is proven to last in those harsh environments, including everything road salts to those rough gravel roads. Perfectly protected with the best anti-rust coating mankind can make. Backed with our 3 Year Warranty, we stand behind what we Build !\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cstrong data-mce-fragment=\"1\"\u003eNote\u003c\/strong\u003e: All our kits are produced for the longest wheelbase available for this truck. You may need to trim your kit, and the complete instructions provide all the necessary measurements to make it a perfect fit.  \u003c\/div\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePatented  Exhaust Pulse Chamber - Pat. 11713700\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes all necessary hardware for an at home installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUses factory hanger locations for easy installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo In-Cab Droning, Guaranteed\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2-4 MPG Improvement \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect Fitment - Clamp Together \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy Installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eClears the Factory Spare Tire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003e? Fits \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eMake : Toyota \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eYear : 2014  - 2021\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eChassis : Tundra \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eEngine : 5.7L \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003eWheel Base : This kit Fits all wheelbase and Shorter with all parts necessary for that home installer. \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\n\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cspan data-mce-fragment=\"1\" data-offset-key=\"44nc7-0-0\"\u003e\u003cimg data-mce-fragment=\"1\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0550\/0151\/4028\/deleted\/files\/3Y-limited-warranty-EN_100x100.png?v=1703707643\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0550\/0151\/4028\/deleted\/files\/3Y-limited-warranty-EN_100x100.png?v=1703707643\"\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"MPI Exhaust Technologies","offers":[{"title":"T221-Behind Tire - C \/ MPI Performance series \/ Powder coated Black","offer_id":46793026240681,"sku":"T221-BTPSBLK-C","price":674.95,"currency_code":"USD","in_stock":false},{"title":"T222-Under Bumper - C \/ MPI Performance series \/ Powder coated Black","offer_id":46793026273449,"sku":"T222-UBPSBLK-C","price":674.95,"currency_code":"USD","in_stock":false},{"title":"T221-Behind Tire - C \/ MPI Performance series \/ Polished Bright Chrome","offer_id":46793026306217,"sku":"T221-BTPSCM-C","price":674.95,"currency_code":"USD","in_stock":false},{"title":"T222-Under Bumper - C \/ MPI Performance series \/ Polished Bright Chrome","offer_id":46793026338985,"sku":"T222-UBPSCM-C","price":674.95,"currency_code":"USD","in_stock":false},{"title":"T221-Behind Tire - C \/ MPI Turbo series \/ Powder coated Black","offer_id":46793026371753,"sku":"T221-BTTBBLK-C","price":674.95,"currency_code":"USD","in_stock":false},{"title":"T222-Under Bumper - C \/ MPI Turbo series \/ Powder coated Black","offer_id":46793026404521,"sku":"T222-UBTBBLK-C","price":674.95,"currency_code":"USD","in_stock":false},{"title":"T221-Behind Tire - C \/ MPI Turbo series \/ Polished Bright Chrome","offer_id":46793026437289,"sku":"T221-BTTBCM-C","price":674.95,"currency_code":"USD","in_stock":false},{"title":"T222-Under Bumper - C \/ MPI Turbo series \/ Polished Bright Chrome","offer_id":46793026470057,"sku":"T222-UBTBCM-C","price":674.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/Toyota_Tundra__2014-2021_5.7L_BLK_BT_ed11d5f3-b0f1-467e-b038-ca1278902594.jpg?v=1770653072"},{"product_id":"toyota-tacoma-2005-2023-v6-clamp-on-mpi-exhaust-cat-back-dual-exhaust-kits","title":"Toyota Tacoma, 2005-2023, V6 , Clamp\/On - MPI Exhaust Cat-Back Dual Exhaust Kits","description":"\u003cp\u003eMake that Toyota Tacoma sound and perform how it's supposed to by increasing the exhaust flow and enhancing overall power.\u003cbr\u003eMore power means you don't have to mash the go pedal as hard, and as a benefit, you will see a 2-4 mile per gallon increase on the highway.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures and Benefits\u003c\/strong\u003e\u003cbr\u003eHorsepower Gains: + 6.49 hp\u003cbr\u003eTorque Gains: +6.75 lb-ft at \u003cbr\u003eAverage 2-4 MPG Improvement\u003cbr\u003eReduced EGT by 150 Degrees\u003cbr\u003ePatented Pulse Chamber Technologies for a Guaranteed Zero Drone Even While Towing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSound\u003c\/strong\u003e: The MPI V-6 Performance series features a pleasant, mellow sound. It has a slightly higher noise level than the stock model and a lower tone, making it sound more like a truck than a Hoover vacuum. It is guaranteed to have no in-cab droning.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuality\u003c\/strong\u003e: MPI Exhaust Kits utilize the highest-quality 14-gauge material. Tubing: This extra-thick tubing is proven to withstand harsh environments, including road salts and rough gravel roads. It is perfectly protected with the best anti-rust coating mankind can make. Backed with our 3-Year Warranty, we stand behind what we build!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: All our kits are produced for the longest wheelbase available for this truck. You may need to trim your kit; the complete instructions provide all the necessary measurements to ensure a perfect fit. All hardware is provided to assemble this Clamp-on kit completely\u003cbr\u003ePatented Exhaust Pulse Chamber - Pat. 11713700\u003cbr\u003eNo In-Cab Droning, Guaranteed\u003cbr\u003e2-4 MPG Improvement\u003cbr\u003eImproved Performance\u003cbr\u003eEnhanced Exterior Sound\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eInstructions: \u003ca title=\"Tacoma - Clamp Kits\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0550\/0151\/4028\/files\/T0-12.pdf?v=1762284241\"\u003eT0-12\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"MPI Exhaust Technologies","offers":[{"title":"Behind Tire-C \/ MPI Performance Series \/ Powder coated Black","offer_id":46793026502825,"sku":"T021-BTPSBLK-C","price":599.95,"currency_code":"USD","in_stock":false},{"title":"Behind Tire-C \/ MPI Performance Series \/ Polished Bright Chrome","offer_id":46793026535593,"sku":"T021-BTPSCM-C","price":599.95,"currency_code":"USD","in_stock":false},{"title":"Behind Tire-C \/ MPI Turbo Series \/ Powder coated Black","offer_id":46793026568361,"sku":"T021-BTTBBLK-C","price":599.95,"currency_code":"USD","in_stock":false},{"title":"Behind Tire-C \/ MPI Turbo Series \/ Polished Bright Chrome","offer_id":46793026601129,"sku":"T021-BTTBCHM-C","price":599.95,"currency_code":"USD","in_stock":false},{"title":"Under Bumper-C \/ MPI Performance Series \/ Powder coated Black","offer_id":46793026633897,"sku":"T022-UBPSBLK-C","price":599.95,"currency_code":"USD","in_stock":false},{"title":"Under Bumper-C \/ MPI Performance Series \/ Polished Bright Chrome","offer_id":46793026666665,"sku":"T022-UBPSCM-C","price":599.95,"currency_code":"USD","in_stock":false},{"title":"Under Bumper-C \/ MPI Turbo Series \/ Powder coated Black","offer_id":46793026699433,"sku":"T022-UBTBBLK-C","price":599.95,"currency_code":"USD","in_stock":false},{"title":"Under Bumper-C \/ MPI Turbo Series \/ Polished Bright Chrome","offer_id":46793026732201,"sku":"T0222-UBTBCHM-C","price":599.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/IMG_1108_f29985aa-08d0-434a-a95f-b7f67d22dee1.jpg?v=1770653072"},{"product_id":"toyota-tundra-2014-2021-5-7l-stainless-mpi-exhaust-cat-back-dual-exhaust-kits","title":"Toyota Tundra, 2014-2021,  5.7L - Stainless - MPI Exhaust Cat-Back Dual Exhaust Kits","description":"\u003ch2 class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eMPI Exhaust Kit for Tundra Overview\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\n\u003c\/h2\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cspan\u003eThe MPI Exhaust Kit is a Cat-back Exhaust system specifically engineered for Tundra trucks equipped with the 5.7L Engine, aimed at enhancing overall vehicle performance. This kit provides notable improvements in horsepower, torque, and fuel efficiency, verified through extensive dyno testing. Designed for easy installation, it leverages 35 years of exhaust experience and includes all necessary hardware for a hassle-free setup. \u003c\/span\u003e\u003cspan\u003eAdditionally, it is 50-state Emission Compliant and does not void any vehicle warranties.\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eKey Features\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003ePatented Pulse Chamber Technology\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Eliminates all in-cab droning common with other aftermarket exhausts.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eHigh-grade stainless-steel Construction\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Formulated for high heat resistance and durability against road salts.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eStraightforward Installation\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: No welding required, utilizes factory hanger locations, and comes with detailed trimming instructions for different wheelbases.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003ePerformance Benefits\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eHorsepower Gains\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: +17.88 hp at 4,500 RPM\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eTorque Gains\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: +20.98 lb-ft at 4,500 RPM\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eFuel Efficiency\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Average improvement of 2-4 MPG\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eSound Quality\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Aggressive yet refined exhaust tone with no in-cab droning.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eFitment\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eMake\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Toyota \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eModel Years\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: 2014 - 2021\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eChassis\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Tundra \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eEngine\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: 5.7L \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eWheelbase\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Compatible with all wheelbases\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eDetailed Specifications\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eMaterial\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: 409 Stainless \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eInstallation\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Clamp-together system, direct fitment to factory hanger locations.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eHardware\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Includes 409 band clamps with all hardware for installation.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eDesign\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Compatible with the factory spare tire.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eTubing Size\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Dyno-proven optimal size for performance.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eTips\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Large 3.5\" x 12\" long 304 Stainless tips for a refined appearance.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003ePatented Technology\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eExhaust Pulse Chamber (Pat. 11713700)\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Guaranteed no drone and optimizes exhaust flow and overall performance.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"MsoNormal\"\u003e\u003cb\u003e\u003cspan\u003eWarranty\u003c\/span\u003e\u003c\/b\u003e\u003cb\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul type=\"disc\"\u003e\n\u003cli class=\"MsoNormal\"\u003e\n\u003cb\u003e\u003cspan\u003eStainless Warranty\u003c\/span\u003e\u003c\/b\u003e\u003cspan\u003e: Limited-Life Time \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eInstructions Sheet \u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0550\/0151\/4028\/files\/T200_Instructions.pdf?v=1770316600\"\u003e\u003cstrong\u003eT2 - Instructions \u003c\/strong\u003e\u003c\/a\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"MPI Exhaust Technologies","offers":[{"title":"Behind Tire - SS \/ MPI Performance Series - Polished Stainless \/ Matte Black - Powder coated","offer_id":46793026764969,"sku":"T221-BTPSBLK-SS","price":975.0,"currency_code":"USD","in_stock":false},{"title":"Behind Tire - SS \/ MPI Performance Series - Polished Stainless \/ Polished Stainless","offer_id":46793026797737,"sku":"T221-BTPSCM-SS","price":975.0,"currency_code":"USD","in_stock":false},{"title":"Behind Tire - SS \/ MPI Turbo Series - Polished Stainless \/ Matte Black - Powder coated","offer_id":46793026830505,"sku":"T221-BTTBBLK-SS","price":975.0,"currency_code":"USD","in_stock":false},{"title":"Behind Tire - SS \/ MPI Turbo Series - Polished Stainless \/ Polished Stainless","offer_id":46793026863273,"sku":"T221-BTTBCM-SS","price":975.0,"currency_code":"USD","in_stock":false},{"title":"Under Bumper - SS \/ MPI Performance Series - Polished Stainless \/ Matte Black - Powder coated","offer_id":46793026896041,"sku":"T222-UBPSBLK-SS","price":975.0,"currency_code":"USD","in_stock":false},{"title":"Under Bumper - SS \/ MPI Performance Series - Polished Stainless \/ Polished Stainless","offer_id":46793026928809,"sku":"T222-UBPSCM-SS","price":975.0,"currency_code":"USD","in_stock":false},{"title":"Under Bumper - SS \/ MPI Turbo Series - Polished Stainless \/ Matte Black - Powder coated","offer_id":46793026961577,"sku":"T222-UBTBBLK-SS","price":975.0,"currency_code":"USD","in_stock":false},{"title":"Under Bumper - SS \/ MPI Turbo Series - Polished Stainless \/ Polished Stainless","offer_id":46793026994345,"sku":"T222-UBTBCM-SS","price":975.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/SS_Toyota_Tundra_2014-2021_5.7L_BLK_BT_40645808-f381-4dde-af49-45674bcae7e4.jpg?v=1770653072"},{"product_id":"toyota-tundra-2007-2013-5-7l-mpi-bullnose-exhaust-series","title":"Toyota Tundra, 2007-2013, 5.7L - MPI Bullnose Exhaust Series","description":"\u003cp\u003eThe all-new MPI Bullnoze exhaust series fits your 2007-2013 Tundra, providing a very Deep, Aggressive exterior sound while keeping the interior sound without that drone! The turn-down tips in front of the rear end look like a bull getting ready to charge!\u003c\/p\u003e\n\u003cp\u003eThis series still gains those huge MPI Performance numbers; this Weld-on emissions-legal system features all mandrel-bent tubing built in Montana.\u003c\/p\u003e\n\u003cp\u003eDyno Results: Test vehicle dyno gains of 18 hp and 23 lb-ft at the rear wheels over stock @ 4,200 RPM. Most Vehicles gain 2 - 4 MPG. These numbers are for zero tuning versus stock trucks.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eMuffler Options  :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv dir=\"auto\" style=\"text-align: start;\"\u003e\n\u003cdiv dir=\"auto\"\u003eMPI Performance series mufflers are going to be more aggressive sounding  (  \u003ca title=\"MPI Performance Series\" href=\"https:\/\/www.youtube.com\/watch?v=FjhKM5rqLEk\"\u003e(VIDEO\u003c\/a\u003e)  )\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003eQuality\u003c\/strong\u003e: MPI Exhaust Kits uses the highest-quality Aluminum Tubing. This tubing style is proven to last in harsh environments, including road salts and rough gravel roads. It is perfectly protected with the best anti-rust coating mankind can make. Backed with our 3-Year Warranty, we stand behind what we build!\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cstrong\u003eNote\u003c\/strong\u003e: All our kits are produced for the longest wheelbase available for this truck. You may need to trim your kit, and the complete instructions provide all the necessary measurements to make it a perfect fit.  \u003c\/div\u003e\n\u003cul\u003e\n\u003cli\u003ePatented  Exhaust Pulse Chamber - Pat. 11713700\u003c\/li\u003e\n\u003cli\u003eIncludes all necessary hardware for an at-home installation\u003c\/li\u003e\n\u003cli\u003eUses factory hanger locations for easy installation\u003c\/li\u003e\n\u003cli\u003eNo In-Cab Droning, Guaranteed\u003c\/li\u003e\n\u003cli\u003e2-4 MPG Improvement \u003c\/li\u003e\n\u003cli\u003eDirect Fitment - Clamp Together \u003c\/li\u003e\n\u003cli\u003eEasy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan data-offset-key=\"44nc7-0-0\"\u003e? Fits \u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-offset-key=\"44nc7-0-0\"\u003eMake: Toyota \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-offset-key=\"44nc7-0-0\"\u003eYear: 2007  - 2013\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-offset-key=\"44nc7-0-0\"\u003eChassis: Tundra \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\u003cspan data-offset-key=\"44nc7-0-0\"\u003eEngine: 5.7L \u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv dir=\"auto\"\u003e\n\u003cspan data-offset-key=\"44nc7-0-0\"\u003eWheel Base: This kit fits all wheelbases and is Shorter. It includes all the parts necessary for the home installer. \u003c\/span\u003e \u003cspan data-offset-key=\"44nc7-0-0\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e","brand":"MPI Exhaust Technologies","offers":[{"title":"Default Title","offer_id":46793027027113,"sku":"T124-TDPSBN-W","price":415.95,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/IMG_1225.png?v=1770653072"},{"product_id":"awe-0fg-exhaust-for-tundra-2022","title":"AWE 0FG Exhaust for Tundra (2022+)","description":"\u003cp\u003e\u003cstrong\u003eBuilt for the long haul. Presenting the AWE 0FG Exhaust Suite for the Gen3 Toyota Tundra i-FORCE \u0026amp; i-FORCE MAX:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e50-state emissions-compliant catback configurations available with rugged high-clearance BashGuard™ or dual 4.5” tips\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eEngineered to accommodate the factory retractable BedStep®\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFitments include both hybrid and non-hybrid models with ample clearances for driveshaft loops \u0026amp; gas tank location\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eEqual length front pipes with a bespoke resonated midpipe featuring AWE’s patented drone-canceling 180 Technology® for a signature exhaust note \u0026amp; maximum comfort on the highway\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eHandcrafted from CNC mandrel-bent 3\"\u0026amp; 2.5” U.S.-sourced .065” wall T304L stainless steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eHigh-clearance BashGuard™ configuration ends after the rear axle making it street-legal, and features an extra thick reinforced stainless ring on the outlet, built for bashing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFactory-matched inlet flange for ease of installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e4.5” double-walled slash-cut tips available in chrome silver or diamond black\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eWheelbase extensions are included with every kit to cover 145.7” \u0026amp; 157.7” wheelbases – i.e. Double Cab and Crew Cab models with a  5.5 ft or 6.5 ft bed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLess is more: clean, straight-through design maximizes performance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eDirect bolt-on, no cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eManufactured in-house at AWE\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAWE No CEL Guarantee\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAWE Perfect Fitment Guarantee\u003c\/span\u003e\u003c\/li\u003e\n\u003cli role=\"presentation\" dir=\"ltr\"\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eAWE Lifetime Warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eThe 0FG Catback Exhaust\u003c\/h4\u003e\n\u003cp\u003eAmerican-sourced T304L stainless steel with a wall thickness of .065” runs smoothly from front to back, featuring factory-matched flanges at the inlet, bolting up right after the emissions equipment. Dual 2.5” equal length frontpipes merge into a bespoke 3”, straight-through, dual resonated midpipe to produce a deep, rich soundtrack out of the 3.4T.Equipped with AWE’s patented drone-canceling 180 Technology® for in-cabin comfort, and an additional, tailored resonator responsible for keeping the tones rich and deep, the 0FG provides a proper soundtrack regardless of where you are in the rev range. \u003c\/p\u003e\n\u003cp\u003eEach 0FG Catback features modular extensions for long wheelbase Tundras, and they’re included in every kit. The 0FG Exhaust fits iForce and iForce Max models with generous clearances for driveshaft loops and gas tank locations. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003ePerfect tone, compliments of AWE 180 Technology®. \u003c\/h4\u003e\n\u003cp\u003eKeeping the aggression at the rear of the Tundra, and out of the cabin, is AWE’s patented drone-canceling solution, 180 Technology®. \u003c\/p\u003e\n\u003cp\u003eAs exhaust gasses exit the 3.4T engine and flow into an AWE 180 Technology® equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies. \u003c\/p\u003e\n\u003cp\u003eFull-bodied aggression remains behind the driver, and complete comfort is achieved in the cabin at cruising speeds, all while unlocking a superior soundtrack and optimal flow to stock.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eBashGuard™ \u0026amp; Dual Tips:\u003c\/h4\u003e\n\u003cp\u003eDrivers have the option between AWE’s high-clearance BashGuard™ configuration or dual 4.5” tip configuration. \u003c\/p\u003e\n\u003cp\u003e\u003cu\u003eBashGuard™: \u003c\/u\u003eWhat’s BashGuard? Thanks for asking. The AWE BashGuard™ is appropriately equipped with a .125” thick reinforced stainless ring of the exhaust outlet, tucked up really high out of the way of danger. This configuration is barely visible when looking at Tundra on the ground, and quite literally impossible for any of Earth’s obstacles to reach.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cu\u003eDual Tip:\u003c\/u\u003e Signature 4.5” slash-cut, double-walled tips are available in chrome silver or diamond black for drivers who want the look to match the exhaust note. The dual tips reside in the factory location, aligning with the left side of the rear bumper perfectly. Each tip is individually adjustable allowing depth into the bumper to be set according to personal taste.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003e100% emission-friendly:\u003c\/h4\u003e\n\u003cp\u003eThe 0FG does not interfere with any factory emissions equipment.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eMade in PA, USA:\u003c\/h4\u003e\n\u003cp\u003eEngineered, designed, and manufactured in-house at AWE.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eThe fine print:\u003c\/h4\u003e\n\u003cp\u003eAWE’s Perfect Fitment Guarantee, No CEL Guarantee, and a Lifetime Warranty all come standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AWE","offers":[{"title":"BashGuard Only","offer_id":46828135022761,"sku":"3015-28063)","price":1395.0,"currency_code":"USD","in_stock":true},{"title":"Chrome Silver","offer_id":46828135055529,"sku":"3015-32063","price":1625.0,"currency_code":"USD","in_stock":true},{"title":"Diamond Black","offer_id":46828135088297,"sku":"3015-33063","price":1625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/3015-28063_1_d86f0121-7391-4694-b33e-5b40dcdf808f_jpg.webp?v=1771602528"},{"product_id":"flowmaster-flow-fx-cat-back-exhaust-system","title":"Flowmaster Flow FX Cat-Back Exhaust System For Tacoma 05+","description":"\u003cp\u003e\u003cspan\u003eUpgrade the sound and performance of your Tacoma with a performance driven exhaust system engineered for improved flow and a deep, refined tone. Designed specifically for the 2016–2023 Toyota Tacoma 3.5L, this Flow FX cat-back system enhances horsepower and torque while delivering a clean, aggressive look with a black ceramic coated tip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eImportant note\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eVehicle fitment: Designed for 2016–2023 Toyota Tacoma equipped with the 3.5L engine.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDirect bolt-on installation: Utilizes factory hanger locations for straightforward at-home installation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLifetime limited warranty: Backed by Flowmaster’s Lifetime Limited Warranty.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eKey features\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePerformance gains: Increases of up to 9 horsepower and 10 lb-ft of torque over stock.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMandrel bent tubing: 2.5-inch 16-gauge 409 stainless steel tubing maximizes exhaust flow and durability.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eStraight-through muffler: Flow FX performance muffler delivers a deep, moderate tone while improving exhaust efficiency.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePremium exhaust tip: 3.5-inch diameter black ceramic coated 304 stainless steel tip for an aggressive, custom appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCorrosion resistant construction: Built from durable 409 stainless steel throughout the system.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eComplete installation kit: Includes all necessary hardware and detailed instructions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cspan\u003eWhat’s included\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCat-back exhaust system: Complete Flow FX system from the catalytic converter back.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBlack ceramic coated tip: 3.5-inch performance exhaust tip.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHardware and instructions: All required mounting hardware and installation guide.\u003c\/span\u003e\u003c\/p\u003e","brand":"Flowmaster","offers":[{"title":"Default Title","offer_id":46838514843817,"sku":null,"price":505.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/FullSizeRender_0deffbda-fef0-4d6f-b53e-4cea09c74251.jpg?v=1772073551"},{"product_id":"carven-exhaust-dump-exit-kit-for-4runner-2025","title":"Carven Exhaust Dump Exit Kit for 4Runner (2025+)","description":"\u003cp data-start=\"350\" data-end=\"745\"\u003e\u003cspan\u003eThe Carven Dump Exit Exhaust System for the \u003cstrong data-start=\"394\" data-end=\"422\"\u003e2025–2026 Toyota 4Runner\u003c\/strong\u003e is engineered to bring out a \u003cstrong data-start=\"452\" data-end=\"475\"\u003edeep, powerful tone\u003c\/strong\u003e that complements Toyota’s newest generation platform and upgraded powertrains. Designed with our proven high-clearance layout, this system delivers an enhanced exhaust note, improved flow, and a rugged off-road–ready design—now tailored for the all-new 4Runner chassis.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"747\" data-end=\"878\"\u003e\u003cspan\u003eWhether you’re daily driving or hitting the trails, this dump exit system brings the signature Carven sound to the 6th-gen 4Runner.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr data-start=\"880\" data-end=\"883\"\u003e\n\u003ch3 data-start=\"885\" data-end=\"906\"\u003e\u003cspan\u003e\u003cstrong data-start=\"889\" data-end=\"906\"\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"908\" data-end=\"1094\"\u003e\u003cspan\u003e\u003cstrong data-start=\"908\" data-end=\"931\"\u003eDeep Exhaust Sound:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-start=\"931\" data-end=\"934\"\u003e\u003cspan\u003eProduces a low, resonant tone at idle and cruising, with an aggressive growl under throttle—enhancing the character of the new 4Runner’s updated engine options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1096\" data-end=\"1310\"\u003e\u003cspan\u003e\u003cstrong data-start=\"1096\" data-end=\"1139\"\u003eOptimized for the New 4Runner Platform:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-start=\"1139\" data-end=\"1142\"\u003e\u003cspan\u003eDesigned around the all-new 6th-gen chassis, packaging, and drivetrain layout to ensure perfect fitment with Toyota’s redesigned exhaust routing and underbody geometry.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1312\" data-end=\"1493\"\u003e\u003cspan\u003e\u003cstrong data-start=\"1312\" data-end=\"1347\"\u003eHigh-Clearance Off-Road Design:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-start=\"1347\" data-end=\"1350\"\u003e\u003cspan\u003eOur compact dump-exit configuration stays tucked high and tight to maximize ground clearance—ideal for trail use, camping, and overland setups.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1495\" data-end=\"1673\"\u003e\u003cspan\u003e\u003cstrong data-start=\"1495\" data-end=\"1532\"\u003eHandcrafted Premium Construction:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-start=\"1532\" data-end=\"1535\"\u003e\u003cspan\u003eBuilt in the USA from high-quality stainless steel with TIG welding to ensure long-lasting durability, strength, and corrosion resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"1675\" data-end=\"1919\"\u003e\u003cspan\u003e\u003cstrong data-start=\"1675\" data-end=\"1712\"\u003eDirect-Fit, Bolt-On Installation:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-start=\"1712\" data-end=\"1715\"\u003e\u003cspan\u003eNo cutting or welding required. The kit includes a \u003cstrong data-start=\"1766\" data-end=\"1795\"\u003e2.50\" inlet, 3.00\" outlet\u003c\/strong\u003e, and all necessary hardware (1 x 2.50\" band clamp) for a straightforward, clean replacement of the factory exhaust section.\u003c\/span\u003e\u003c\/p\u003e\n\u003chr data-start=\"1921\" data-end=\"1924\"\u003e\n\u003ch3 data-start=\"1926\" data-end=\"1954\"\u003e\u003cspan\u003e\u003cstrong data-start=\"1930\" data-end=\"1952\"\u003eCompatible Models:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-start=\"1955\" data-end=\"2033\"\u003e\u003cspan\u003e\u003cstrong data-start=\"1955\" data-end=\"1983\"\u003e2025–2026 Toyota 4Runner\u003c\/strong\u003e\u003c\/span\u003e\u003cbr data-start=\"1983\" data-end=\"1986\"\u003e\u003cspan\u003e(Including all available engine configurations) EXCEPT I-FORCE MAX\u003c\/span\u003e\u003c\/p\u003e\n\u003chr data-start=\"2035\" data-end=\"2038\"\u003e\n\u003cp data-start=\"2040\" data-end=\"2250\"\u003e\u003cspan\u003eUnleash a deeper, more refined tone and upgrade your next-generation 4Runner with Carven’s handcrafted Dump Exit Exhaust System—\u003cstrong data-start=\"2168\" data-end=\"2250\"\u003eProudly made in the USA and engineered for performance, durability, and sound.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Carven Exhaust","offers":[{"title":"Default Title","offer_id":46844960440489,"sku":"CT1019","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/IMG-7443.webp?v=1772504287"},{"product_id":"carven-exhaust-high-clearance-dump-exit-exhaust-system-for-gx470-gx460","title":"Carven Exhaust High Clearance Dump Exit Exhaust System for GX470 \u0026 GX460","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCarven Dump Exit Exhaust System for Toyota 4Runner \u0026amp; Lexus GX (2005-2023) | High-Performance Sound \u0026amp; High Clearance\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eCarven Dump Exit Exhaust System\u003c\/strong\u003e is expertly engineered to enhance the performance and sound of your \u003cstrong\u003eToyota 4Runner\u003c\/strong\u003e or \u003cstrong\u003eLexus GX\u003c\/strong\u003e (2005-2023) V8 models. Designed for off-road enthusiasts, this exhaust system delivers a deep, low tone at idle and cruising speeds, with an aggressive growl during hard acceleration. Its \u003cstrong\u003ehigh-clearance design\u003c\/strong\u003e ensures optimal ground clearance, making it the ideal upgrade for those who demand both \u003cstrong\u003esound\u003c\/strong\u003e and \u003cstrong\u003eperformance\u003c\/strong\u003e in tough off-road conditions.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDeep, Aggressive Tone\u003c\/strong\u003e: Low, rich sound at idle and cruising speeds, becoming aggressive during acceleration—perfect for off-road and everyday driving.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eHigh-Quality Construction\u003c\/strong\u003e: Handcrafted in the USA from \u003cstrong\u003epremium stainless steel\u003c\/strong\u003e, assembled with \u003cstrong\u003eTIG welding\u003c\/strong\u003e for long-lasting durability and superior performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eHigh Clearance Design\u003c\/strong\u003e: Provides maximum ground clearance, ideal for off-road driving without sacrificing sound or performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDirect Fit, Bolt-On Design\u003c\/strong\u003e: No cutting or welding required. Easy, straightforward installation with all necessary components.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eComplete Hardware Included\u003c\/strong\u003e: Comes with a 2.50\" inlet, 3.00\" outlet, and 1 x 2.50\" band clamp for a seamless fit.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCompatible Models:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e2005-2009 Toyota 4Runner V8 4.7L\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e2005-2009 Lexus GX470 V8 4.7L\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e2010-2023 Lexus GX460 V8 4.6L\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eProudly Made in the USA\u003c\/strong\u003e: Carven products are handcrafted in-house with precision and pride, ensuring the highest quality and performance standards.\u003c\/span\u003e\u003c\/p\u003e","brand":"Carven Exhaust","offers":[{"title":"Default Title","offer_id":46846844108969,"sku":"CL1000","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/4_cf3db9d3-5ace-4512-966f-13b610fefb5d_jpg.webp?v=1772582163"},{"product_id":"carven-exhaust-high-clearance-dump-exit-exhaust-system-for-4runner-2003-2024","title":"Carven Exhaust High Clearance Dump Exit Exhaust System for 4Runner (2003-2024)","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eUpgrade Your Toyota 4Runner with the Carven Dump Exit Exhaust System | Performance \u0026amp; Sound\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eCarven Dump Exit Exhaust System\u003c\/strong\u003e is engineered to deliver a deep, powerful tone at idle and cruising speeds, with an aggressive growl under hard acceleration. Designed for \u003cstrong\u003eoff-road enthusiasts\u003c\/strong\u003e, this \u003cstrong\u003ehigh-clearance exhaust system\u003c\/strong\u003e significantly boosts both \u003cstrong\u003eperformance\u003c\/strong\u003e and \u003cstrong\u003esound\u003c\/strong\u003e for your \u003cstrong\u003eToyota 4Runner (2003-2024)\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDeep Exhaust Sound\u003c\/strong\u003e: Features a deep, rumbling tone at idle and cruising, with a powerful growl at full throttle—perfect for making your 4Runner stand out both on and off the road.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eHigh Clearance Design\u003c\/strong\u003e: Built specifically for the off-road community, offering maximum \u003cstrong\u003eground clearance\u003c\/strong\u003e to prevent damage on rough terrain.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePremium Quality Construction\u003c\/strong\u003e: Handcrafted in the USA using durable \u003cstrong\u003estainless steel\u003c\/strong\u003eand TIG welding, ensuring long-lasting reliability and performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDirect Fit, Bolt-On Installation\u003c\/strong\u003e: Designed to fit your \u003cstrong\u003eToyota 4Runner\u003c\/strong\u003e without any cutting or welding. Includes a 2.50\" inlet and 3.00\" outlet, with all necessary hardware (1 x 2.50\" band clamp).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eNo Welding or Cutting Required\u003c\/strong\u003e: Easy, hassle-free installation with a direct-fit replacement design for an effortless upgrade.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCompatible Models\u003c\/strong\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e2003-2024 Toyota 4Runner V6 4.0L\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUnleash the full potential of your \u003cstrong\u003eToyota 4Runner\u003c\/strong\u003e with \u003cstrong\u003eCarven’s handcrafted, high-performance Dump Exit Exhaust System\u003c\/strong\u003e—Proudly made in the USA for ultimate durability and sound.\u003c\/span\u003e\u003c\/p\u003e","brand":"Carven Exhaust","offers":[{"title":"Default Title","offer_id":46846849581225,"sku":"CT1010","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/4_jpg.webp?v=1772582363"},{"product_id":"carven-exhaust-high-clearance-dump-exit-exhaust-system-for-fj-cruiser-2007-2014","title":"Carven Exhaust High Clearance Dump Exit Exhaust System for FJ Cruiser (2007-2014)","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCarven Dump Exit Exhaust Kit for 2007-2014 Toyota FJ Cruiser | High-Clearance, Deep Sound, Off-Road Performance\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your \u003cstrong\u003e2007-2014 Toyota FJ Cruiser\u003c\/strong\u003e with the \u003cstrong\u003eCarven Dump Exit Exhaust Kit\u003c\/strong\u003e, designed to maximize \u003cstrong\u003eground clearance\u003c\/strong\u003e and optimize off-road performance. This \u003cstrong\u003edirect-fit, bolt-on exhaust system\u003c\/strong\u003e delivers an aggressive sound profile while preserving your FJ Cruiser’s rugged capabilities. Perfect for off-road enthusiasts, the \u003cstrong\u003eCarven Dump Exit Kit\u003c\/strong\u003eis engineered to enhance both performance and style.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eHigh-Clearance Design\u003c\/strong\u003e: Adjustable exit angle for improved \u003cstrong\u003eground clearance\u003c\/strong\u003e, ensuring your FJ Cruiser can tackle the toughest terrain without sacrificing performance or sound.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDirect Fit, Bolt-On Installation\u003c\/strong\u003e: No cutting or welding required—easy installation with included hardware (1 x 2.50\" band clamp).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePremium Stainless Steel Construction\u003c\/strong\u003e: Crafted from \u003cstrong\u003edurable stainless steel\u003c\/strong\u003e and TIG welded for superior strength and long-lasting durability.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDeep Sound\u003c\/strong\u003e: Delivers a deep, throaty tone that enhances the FJ Cruiser’s powerful presence on and off the road.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eProudly Made in the USA\u003c\/strong\u003e: Handcrafted in-house, reflecting Carven’s commitment to quality and performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFitment:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e2007-2014 Toyota FJ Cruiser\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDump Exit Kit Specifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e2.50” Inlet\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e3.00” Outlet\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eTransform Your Off-Road Experience\u003c\/strong\u003e: Unleash the full potential of your \u003cstrong\u003eToyota FJ Cruiser\u003c\/strong\u003e with the \u003cstrong\u003eCarven Dump Exit Exhaust Kit\u003c\/strong\u003e, a perfect blend of performance, style, and durability for your next adventure.\u003c\/span\u003e\u003c\/p\u003e","brand":"Carven Exhaust","offers":[{"title":"Default Title","offer_id":46846853316777,"sku":"CT1011","price":499.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/ScreenShot2022-11-30at7_28_28AM_png.webp?v=1772582643"},{"product_id":"carven-exhaust-dump-exit-kit-for-land-cruiser-2024","title":"Carven Exhaust Dump Exit Kit for Land Cruiser (2024+)","description":"\u003cp data-start=\"125\" data-end=\"178\" class=\"\"\u003e\u003cspan\u003e\u003cstrong data-start=\"125\" data-end=\"178\"\u003eAll-New Dump Exit Kit – LC250 Toyota Land Cruiser\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"180\" data-end=\"486\" class=\"\"\u003e\u003cspan\u003eTake your LC250 to the next level with our all-new Dump Exit Kit—engineered specifically for off-roaders and performance enthusiasts who demand more from their exhaust. Built in-house in Southern California, this bolt-on upgrade delivers an unbeatable combination sound, and rugged functionality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-start=\"488\" data-end=\"505\" class=\"\"\u003e\u003cspan\u003e\u003cstrong data-start=\"488\" data-end=\"505\"\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-start=\"507\" data-end=\"1311\"\u003e\n\u003cli data-start=\"507\" data-end=\"629\" class=\"\"\u003e\n\u003cp data-start=\"509\" data-end=\"629\" class=\"\"\u003e\u003cspan\u003e\u003cstrong data-start=\"509\" data-end=\"535\"\u003e3\" Mandrel-Bent Tubing\u003c\/strong\u003e – Precision-crafted to maintain smooth, unrestricted airflow for enhanced engine performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"630\" data-end=\"757\" class=\"\"\u003e\n\u003cp data-start=\"632\" data-end=\"757\" class=\"\"\u003e\u003cspan\u003e\u003cstrong data-start=\"632\" data-end=\"658\"\u003eTR Performance Muffler\u003c\/strong\u003e – Tuned to produce a deep, refined tone at idle and an aggressive growl when you hit the throttle.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"758\" data-end=\"919\" class=\"\"\u003e\n\u003cp data-start=\"760\" data-end=\"919\" class=\"\"\u003e\u003cspan\u003e\u003cstrong data-start=\"760\" data-end=\"780\"\u003eDump-Exit Design\u003c\/strong\u003e – Strategically exits just before the rear axle to maximize ground clearance and safeguard exhaust components during extreme off-road use.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"920\" data-end=\"1070\" class=\"\"\u003e\n\u003cp data-start=\"922\" data-end=\"1070\" class=\"\"\u003e\u003cspan\u003e\u003cstrong data-start=\"922\" data-end=\"948\"\u003eChassis-Tucked Fitment\u003c\/strong\u003e – Designed to hug the underbody, offering a sleek profile that stays clear of obstacles where factory systems fall short.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1071\" data-end=\"1226\" class=\"\"\u003e\n\u003cp data-start=\"1073\" data-end=\"1226\" class=\"\"\u003e\u003cspan\u003e\u003cstrong data-start=\"1073\" data-end=\"1097\"\u003eBolt-On Installation\u003c\/strong\u003e – Simple, no-fuss install with no cutting or welding required. Includes band clamp; reuses OEM flange hardware for a secure fit.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-start=\"1227\" data-end=\"1311\" class=\"\"\u003e\n\u003cp data-start=\"1229\" data-end=\"1311\" class=\"\"\u003e\u003cspan\u003e\u003cstrong data-start=\"1229\" data-end=\"1248\"\u003eMade in the USA\u003c\/strong\u003e – Hand-built and TIG-welded with pride in Southern California.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"1313\" data-end=\"1430\" class=\"\"\u003e\u003cspan\u003eWhether you're rock crawling or just want your LC250 to sound as bold as it looks, this kit is the ultimate upgrade.\u003c\/span\u003e\u003c\/p\u003e","brand":"Carven Exhaust","offers":[{"title":"Default Title","offer_id":46846867308713,"sku":"CT1017","price":649.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/7_740f129d-f3a5-4325-9f6c-6eae284fff24_png.webp?v=1772583329"},{"product_id":"carven-exhaust-dump-exit-exhaust-kit-for-tacoma-4-0l-short-bed-2005-2015","title":"Carven Exhaust Dump Exit Exhaust Kit for Tacoma 4.0L Short Bed (2005-2015)","description":"\u003cp\u003e\u003cspan\u003eElevate your off-road game with the Carven Exhaust Dump Exit Exhaust Kit, designed specifically for 2005-2015 Toyota Tacoma 4.0L Short Bed models. Engineered for performance and durability, this exhaust kit is perfect for adventurers who demand the best from their vehicle.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- \u003cem\u003eDirect Fit Bolt-On Installation:\u003c\/em\u003e No cutting or welding required for a hassle-free setup.  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- \u003cem\u003eHigh-Clearance Design:\u003c\/em\u003e Optimized for off-road trails and tough terrains, ensuring maximum ground clearance for your adventures.  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- \u003cem\u003eMandrel-Bent Tubing:\u003c\/em\u003e Precision-crafted for smooth airflow, enhancing performance and delivering that signature Carven sound.  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- \u003cem\u003eTIG-Welded Construction:\u003c\/em\u003e Built for strength and durability, ensuring your exhaust withstands the harshest conditions.  \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- \u003cem\u003eProudly Made in the USA:\u003c\/em\u003e Manufactured with care and craftsmanship you can trust.  \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your Tacoma with the Carven Exhaust Dump Exit Kit and experience unmatched performance, rugged durability, and a sleek, trail-ready design. Whether you're conquering rough trails or cruising the open road, this exhaust kit delivers both form and function in one complete package.\u003c\/span\u003e\u003c\/p\u003e","brand":"Carven Exhaust","offers":[{"title":"Default Title","offer_id":46846873698473,"sku":"CT1016","price":589.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/1_3873573b-124a-4db2-b19a-eca0cdcf9b0c_png.webp?v=1772583596"},{"product_id":"carven-exhaust-cat-back-exhaust-kit-4-0-single-exit-tips-for-tacoma-3-5l-2016-2023","title":"Carven Exhaust Cat-Back Exhaust Kit | 4.0” Single Exit Tips for Tacoma 3.5L (2016-2023)","description":"\u003cp\u003e\u003cspan\u003eElevate your \u003cstrong\u003e2016-2023 Toyota Tacoma 3.5L\u003c\/strong\u003e with the \u003cstrong\u003eCarven Cat-Back Exhaust Kit\u003c\/strong\u003e, designed to deliver an aggressive tone at idle, cruising, and during acceleration, all while minimizing in-cab noise. Crafted from \u003cstrong\u003epremium stainless steel\u003c\/strong\u003e and assembled using \u003cstrong\u003eTIG welding processes\u003c\/strong\u003e, this exhaust system is built to maximize both \u003cstrong\u003eperformance\u003c\/strong\u003e and \u003cstrong\u003esound\u003c\/strong\u003e. Proudly made in the USA, Carven Exhaust systems provide the reliability and quality you deserve.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFits the Following Models:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eShort Bed Kit\u003c\/strong\u003e: For \u003cstrong\u003e2016-2023 Toyota Tacoma 3.5L\u003c\/strong\u003e \u003cstrong\u003eAccess Cab\u003c\/strong\u003e with \u003cstrong\u003e6ft Bed\u003c\/strong\u003e or \u003cstrong\u003e2016-2022 Toyota Tacoma 3.5L\u003c\/strong\u003e \u003cstrong\u003eDouble Cab\u003c\/strong\u003e with \u003cstrong\u003e5ft Bed\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eRegular Bed Kit\u003c\/strong\u003e: For \u003cstrong\u003e2016-2023 Toyota Tacoma 3.5L\u003c\/strong\u003e \u003cstrong\u003eDouble Cab\u003c\/strong\u003e with \u003cstrong\u003e6ft Bed\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDirect OEM Replacement\u003c\/strong\u003e: Hassle-free, \u003cstrong\u003ebolt-on installation\u003c\/strong\u003e with no cutting or welding required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eEnhanced Sound\u003c\/strong\u003e: Experience a deeper, more desirable \u003cstrong\u003e\"growl\"\u003c\/strong\u003e during startup and acceleration, with minimal drone at highway cruising speeds.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFinish Options\u003c\/strong\u003e: Choose between \u003cstrong\u003eCerakote Black\u003c\/strong\u003e or \u003cstrong\u003ePolished Stainless\u003c\/strong\u003e for the 4.0” exhaust tip, adding a sleek, high-performance look to your Tacoma.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eProudly Made in the USA\u003c\/strong\u003e: Crafted with precision and care for long-lasting quality and performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your \u003cstrong\u003eToyota Tacoma 3.5L\u003c\/strong\u003e today with the \u003cstrong\u003eCarven Cat-Back Exhaust Kit\u003c\/strong\u003e and enjoy a bold new sound and enhanced performance!\u003c\/span\u003e\u003c\/p\u003e","brand":"Carven Exhaust","offers":[{"title":"SHORT BED 5’ \/ Ceramic Coated Black","offer_id":46846900371625,"sku":"CT1002","price":719.99,"currency_code":"USD","in_stock":true},{"title":"SHORT BED 5’ \/ Polished Stainless","offer_id":46846900404393,"sku":"CT1003","price":719.99,"currency_code":"USD","in_stock":true},{"title":"REGULAR BED 6' \/ Ceramic Coated Black","offer_id":46846900437161,"sku":"CT1004","price":719.99,"currency_code":"USD","in_stock":true},{"title":"REGULAR BED 6' \/ Polished Stainless","offer_id":46846900469929,"sku":"CT1005","price":719.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/9_c9922c55-9382-442b-bede-2c59d9840be0_png.webp?v=1772583711"},{"product_id":"carven-exhaust-max-clearance-dump-exit-kit-for-tacoma-2024","title":"Carven Exhaust Max Clearance Dump Exit Kit for Tacoma (2024+)","description":"\u003cp\u003e\u003cspan\u003eTransform your \u003cstrong\u003e2025 Toyota Tacoma\u003c\/strong\u003e with the \u003cstrong\u003eCarven Exhaust Max Clearance Dump Exit Exhaust Kit\u003c\/strong\u003e, designed specifically for off-road enthusiasts seeking superior performance and sound. This high-performance exhaust system offers a \u003cstrong\u003edirect-fit, bolt-on design\u003c\/strong\u003e, allowing for an easy installation with no cutting or welding required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePerformance \u0026amp; Sound:\u003c\/strong\u003e Unleash a \u003cstrong\u003edeep, aggressive growl\u003c\/strong\u003e with the 3.00-inch diameter piping that maximizes exhaust flow for enhanced horsepower and torque. Your Tacoma will sound as powerful as it performs, whether you’re climbing rugged terrains or cruising the highway.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDesign \u0026amp; Features:\u003c\/strong\u003e Engineered with off-road durability in mind, this \u003cstrong\u003ecat-back system\u003c\/strong\u003eimproves ground clearance while reducing overall weight. The \u003cstrong\u003edump exit design\u003c\/strong\u003e routes the exhaust directly out of the vehicle, tucking it neatly under the frame rails for added protection against potential damage on challenging trails.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eInstallation \u0026amp; Compatibility:\u003c\/strong\u003e The \u003cstrong\u003eMax Clearance Dump Exit Exhaust Kit\u003c\/strong\u003e offers a \u003cstrong\u003estraightforward, bolt-on installation\u003c\/strong\u003e with no modifications required. The kit fits the following Tacoma models perfectly:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eDOES NOT FIT THE FOLLOWING VEHICLES:\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ei-FORCE MAX \u003cem\u003ehybrid powertrain\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e\u003cem\u003eLong Bed\u003c\/em\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eFits the Following Vehicles:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2025 Toyota Tacoma Double Cab\/Short Bed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2025 Toyota Tacoma Access Cab\/Regular Bed\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDirect Fitment \u0026amp; Bolt-On\u003c\/strong\u003e: No cutting or welding required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eEnhanced Ground Clearance\u003c\/strong\u003e: Optimized for off-road performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eMaximized Exhaust Flow\u003c\/strong\u003e: 3.00-inch diameter piping for increased power and performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eProudly Built in the USA\u003c\/strong\u003e: Crafted with quality and durability in mind.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2x 3.00\" Band Clamps\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3.00\" Dump Exit Exhaust Tip\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your \u003cstrong\u003e2025 Toyota Tacoma\u003c\/strong\u003e with the \u003cstrong\u003eCarven Exhaust Max Clearance Dump Exit Exhaust Kit\u003c\/strong\u003e and enhance your off-road capability, sound, and performance. Experience the growl that commands attention and make your Tacoma stand out on any trail!\u003c\/span\u003e\u003c\/p\u003e","brand":"Carven Exhaust","offers":[{"title":"2WD \u0026 4X4","offer_id":46846905647273,"sku":"CT1013","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/2_437065e9-15f2-4bf1-867a-7e7ec5ff007b_png.webp?v=1772584632"},{"product_id":"carven-exhaust-off-road-trail-pipe-for-tacoma-2024","title":"Carven Exhaust Off-Road Trail Pipe for Tacoma (2024+)","description":"\u003cp data-end=\"139\" data-start=\"86\"\u003e\u003cspan\u003e\u003cstrong data-end=\"139\" data-start=\"86\"\u003eCarven Exhaust Off-Road Trail Pipe – 2024–2025 Toyota Tacoma\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"503\" data-start=\"141\"\u003e\u003cspan\u003eUpgrade your Tacoma’s rear-end clearance without sacrificing your OEM sound. The Carven Exhaust Dump Tip is a direct bolt-on solution designed for the 2024–2025 Toyota Tacoma. Engineered for those who want increased departure angle and reduced rear-end weight, this dump tip replaces your factory tailpipe\/over-axle section while maintaining the factory muffler.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"823\" data-start=\"505\"\u003e\u003cspan\u003eCrafted in the USA from high-quality materials and precision TIG welded, this dump tip utilizes your OEM hardware for a hassle-free installation. Whether you're off-roading, overlanding, or just prefer a more tucked exhaust profile, this setup keeps your factory tone while enhancing performance-focused functionality.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-end=\"842\" data-start=\"825\"\u003e\u003cspan\u003e\u003cstrong data-end=\"842\" data-start=\"825\"\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul data-end=\"1092\" data-start=\"843\"\u003e\n\u003cli data-end=\"875\" data-start=\"843\"\u003e\n\u003cp data-end=\"875\" data-start=\"845\"\u003e\u003cspan\u003eFits 2024–2025 Toyota Tacoma\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"934\" data-start=\"876\"\u003e\n\u003cp data-end=\"934\" data-start=\"878\"\u003e\u003cspan\u003eBolts directly after factory muffler (tailpipe delete)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"960\" data-start=\"935\"\u003e\n\u003cp data-end=\"960\" data-start=\"937\"\u003e\u003cspan\u003eUtilizes OEM hardware\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"988\" data-start=\"961\"\u003e\n\u003cp data-end=\"988\" data-start=\"963\"\u003e\u003cspan\u003eTIG welded construction\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1008\" data-start=\"989\"\u003e\n\u003cp data-end=\"1008\" data-start=\"991\"\u003e\u003cspan\u003eMade in the USA\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1065\" data-start=\"1009\"\u003e\n\u003cp data-end=\"1065\" data-start=\"1011\"\u003e\u003cspan\u003eIdeal for off-road clearance and weight distribution\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1092\" data-start=\"1066\"\u003e\n\u003cp data-end=\"1092\" data-start=\"1068\"\u003e\u003cspan\u003eRetains OEM exhaust tone\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Carven Exhaust","offers":[{"title":"Default Title","offer_id":46846906335401,"sku":"CT1018","price":159.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/1_98d2a2a1-3492-48f7-a7fe-e16670652456_png.webp?v=1772585122"},{"product_id":"carven-exhaust-cat-back-kit-with-4-0-single-exhaust-tip-for-tundra-2014-2021","title":"Carven Exhaust Cat-Back Kit with 4.0” Single Exhaust Tip for Tundra (2014-2021)","description":"\u003cp\u003e\u003cspan\u003eEnhance the sound and performance of your \u003cstrong\u003e2014-2021 Toyota Tundra\u003c\/strong\u003e with the \u003cstrong\u003eCarven Exhaust Cat-Back Kit\u003c\/strong\u003e. Engineered to deliver an aggressive tone at idle, cruising, and under acceleration, this exhaust system keeps cabin noise minimal while providing a powerful, attention-grabbing sound. Handcrafted from \u003cstrong\u003epremium stainless steel\u003c\/strong\u003e and constructed with \u003cstrong\u003eTIG welding\u003c\/strong\u003e techniques, this kit offers superior durability and performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch4\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eAggressive Exhaust Sound\u003c\/strong\u003e: Delivers a bold, commanding exhaust note that enhances your driving experience without excessive cabin drone.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDirect Fit \u0026amp; Bolt-On Installation\u003c\/strong\u003e: Simple, hassle-free installation with \u003cstrong\u003eno cutting\u003c\/strong\u003e or \u003cstrong\u003ewelding\u003c\/strong\u003e required—ideal for DIY enthusiasts.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePremium Finish Options\u003c\/strong\u003e: Choose between \u003cstrong\u003eCerakote Black\u003c\/strong\u003e or \u003cstrong\u003ePolished Stainless\u003c\/strong\u003e for the 4.0” exhaust tip, ensuring a sleek, aggressive appearance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eProudly Made in the USA\u003c\/strong\u003e: Crafted in-house with precision to meet Carven's high standards of quality and performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your \u003cstrong\u003e2014-2021 Toyota Tundra\u003c\/strong\u003e with the \u003cstrong\u003eCarven Exhaust Cat-Back Kit\u003c\/strong\u003e for an improved sound profile and unmatched durability. Order now to take your truck to the next level!\u003c\/span\u003e\u003c\/p\u003e","brand":"Carven Exhaust","offers":[{"title":"DOUBLE CAB\/STANDARD BED 6.5’ \u0026 CREWMAX\/SHORT BED 5.5’ \/ 5.7L \/ Cerakote Black","offer_id":46846998937769,"sku":"CT1001","price":1099.99,"currency_code":"USD","in_stock":true},{"title":"DOUBLE CAB\/STANDARD BED 6.5’ \u0026 CREWMAX\/SHORT BED 5.5’ \/ 5.7L \/ Polished Stainless","offer_id":46846998970537,"sku":"CT1000","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/5_327613fb-b3c2-4c0b-a8c8-981221908257_png.webp?v=1772585414"},{"product_id":"carven-exhaust-signature-clamp-back-kit-for-tundra-2022","title":"Carven Exhaust Signature Clamp Back Kit for Tundra (2022+)","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCarven Exhaust 2022-2025 Toyota Tundra Signature Clamp Back Kit | Performance Exhaust System\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUpgrade your \u003cstrong\u003e2022-2025 Toyota Tundra\u003c\/strong\u003e with the Carven Exhaust Signature Clamp Back Kit for a high-performance, hassle-free exhaust upgrade. This premium kit eliminates the Y-pipe from the original design, simplifying the exhaust system while maintaining an aggressive exhaust tone and maximizing engine performance. Built to last, this system includes the \u003cstrong\u003emuffler\u003c\/strong\u003e, \u003cstrong\u003eover-the-axle section\u003c\/strong\u003e, \u003cstrong\u003etailpipe section\u003c\/strong\u003e, and dual \u003cstrong\u003e4.0\" exhaust tips\u003c\/strong\u003efor a sleek and bold look.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDirect-Fit Clamp Back Exhaust System:\u003c\/strong\u003e Easy installation with a single 2\" cut before the OEM muffler. No modification of the Y-pipe required.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePremium Finish Options:\u003c\/strong\u003e Choose from Cerakote Black or Polished Stainless steel for a polished, aggressive look.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eHigh-Flow Exhaust Path:\u003c\/strong\u003e Designed for a more direct, high-flow exhaust path for improved performance and sound.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eIncludes Dual 4.0” Exhaust Tips:\u003c\/strong\u003e Customize your exhaust sound with bold, aggressive tips that provide a deeper tone.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eOver-the-Axle \u0026amp; Tailpipe Sections:\u003c\/strong\u003e The kit includes all necessary components for a full exhaust system upgrade, reducing installation time and complexity.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003e2022-2025 Toyota Tundra\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eExcludes:\u003c\/strong\u003e Double Cab, Long Bed, and models with an electronic rear bed step.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eWhy Choose Carven Exhaust for Your Toyota Tundra?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePerformance-Focused Design:\u003c\/strong\u003e Maximize your vehicle's exhaust flow for a powerful engine note and enhanced acceleration.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eEasy Bolt-On Installation:\u003c\/strong\u003e No need for welding or complex modifications—just a simple 2-inch cut behind the OEM muffler.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eProudly Made in the USA:\u003c\/strong\u003e All Carven Exhaust systems are handcrafted with premium materials, ensuring durability and long-lasting performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eInstallation Notes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eThe only modification required is a 2\u003cstrong\u003e\" cut before the OEM muffler\u003c\/strong\u003e. No changes to the Y-pipe or other components are necessary.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Carven Exhaust","offers":[{"title":"Polish Stainless","offer_id":46847374164137,"sku":"CT1014","price":1099.99,"currency_code":"USD","in_stock":true},{"title":"Cerakote Black","offer_id":46847374196905,"sku":"CT1015","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/1_555fc847-9460-4e34-a94e-233a60f318b6_png.webp?v=1772603839"},{"product_id":"diesel-heater-mount-exhaust-relocation-kit","title":"Diesel Heater Mount \u0026 Exhaust Relocation Kit","description":"\u003cp\u003e\u003cstrong\u003eSecure Mounting: \u003c\/strong\u003eYour Diesel Heater isn't going anywhere; even with the bed of your truck bouncing off those rock steps on the trail. Designing the Diesel Heater Mount to pair specifically with the \u003ca href=\"https:\/\/www.amazon.com\/dp\/B0C7BS72QG?ref=cm_sw_r_cso_cp_apin_dp_NMZ9SBTFJP4NW8RHY473\u0026amp;ref_=cm_sw_r_cso_cp_apin_dp_NMZ9SBTFJP4NW8RHY473\u0026amp;social_share=cm_sw_r_cso_cp_apin_dp_NMZ9SBTFJP4NW8RHY473\u0026amp;starsLeft=1\u0026amp;skipTwisterOG=1\u0026amp;newOGT=1\" target=\"_blank\" title=\"LF Bros Diesel Heater\" rel=\"noopener\"\u003eLF Bros Diesel Heater\u003c\/a\u003e\u003cspan style=\"box-sizing: border-box; margin: 0px; padding: 0px;\"\u003e\u003ca href=\"https:\/\/www.amazon.com\/dp\/B0C7BS72QG?ref=cm_sw_r_cso_cp_apin_dp_NMZ9SBTFJP4NW8RHY473\u0026amp;ref_=cm_sw_r_cso_cp_apin_dp_NMZ9SBTFJP4NW8RHY473\u0026amp;social_share=cm_sw_r_cso_cp_apin_dp_NMZ9SBTFJP4NW8RHY473\u0026amp;starsLeft=1\u0026amp;skipTwisterOG=1\u0026amp;newOGT=1\" target=\"_blank\" rel=\"noopener\"\u003e \u003c\/a\u003e\u003c\/span\u003eallows for a perfect fit and maximum stability in the mounting brackets. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEverything Included: \u003c\/strong\u003eEverything you need to mount and run your diesel heater inside your Canopy Camper, Genesis, or Truck Bed Topper is included. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDurable Construction: \u003c\/strong\u003eDurable stainless steel construction is ready to be put through the wringer and withstand the test of time. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExhaust Options: \u003c\/strong\u003ePipe out the exhaust from your Diesel Heater through the side (gullwing) doors or rear liftgate using the included extended exhaust and exhaust pipe port. \u003c\/p\u003e","brand":"Dirtbox Overland","offers":[{"title":"Default Title","offer_id":46871674323113,"sku":"sku-50302407016740","price":279.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/Diesel-Heater-Mount-Exhaust-Relocation-Kit.jpg?v=1773497159"},{"product_id":"awe-exhaust-2-4t-for-4runner-2025","title":"AWE Exhaust 2.4T for 4Runner (2025+)","description":"\u003cp\u003e\u003cstrong\u003ePresenting the AWE 0FG Catback Exhaust for the N500 Toyota 4Runner:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003e50-state emissions-compliant 3” catback configuration with rugged high-clearance BashGuard™\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFeatures AWE’s patented drone-canceling 180 Technology® for maximum comfort on the highway\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHigh-clearance BashGuard™ facilitates 2.75” inches of additional clearance compared to stock\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eBashGuard™ features an extra thick reinforced stainless ring on the outlet, built for bashing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eHandcrafted from CNC mandrel-bent 3\" U.S.-sourced .065” wall T304L stainless steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFits Hybrid and Non-Hybrid Models\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eFactory-matched inlet flange for ease of installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLess is more: clean, straight-through design maximizes performance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDirect bolt-on, no cutting required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMade in Pennsylvania, USA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAWE No CEL Guarantee\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eAWE Perfect Fitment Guarantee\u003c\/span\u003e\u003c\/li\u003e\n\u003cli dir=\"ltr\" role=\"presentation\"\u003e\n\u003cspan\u003eAWE Lifetime Warranty\u003cmeta charset=\"UTF-8\"\u003e\u003c\/span\u003e\n\u003ch4\u003e\u003c\/h4\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch4\u003eThe 0FG Exhaust with BashGuard™: \u003c\/h4\u003e\n\u003cp\u003eSingle 3” American-sourced T304L stainless steel with a .065” wall thickness runs seamlessly from front to back, beginning with a factory-matched flange that bolts up immediately after the emissions equipment.\u003c\/p\u003e\n\u003cp\u003eInside, AWE’s patented drone-canceling 180 Technology® keeps the cabin calm while a rear-mounted, precision-tuned resonator shapes the tone to produce a rich, deep, and perfectly balanced note through the entire rev range.\u003c\/p\u003e\n\u003cp\u003eCapping it all off is AWE’s reinforced BashGuard™. That’s the .125”-thick stainless ring protecting the exhaust outlet, tucked high out of harm’s way, providing an additional 2.75” of clearance compared to the factory exhaust. Thanks to the 0FG’s elevated design, contact with terrain is nearly impossible, but if it ever happens, BashGuard™ takes the hit, not your exhaust.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cbr\u003ePerfect tone, compliments of AWE 180 Technology®: \u003c\/h4\u003e\n\u003cp\u003eKeeping the aggression at the rear of the 4Runner, and out of the cabin, is AWE’s patented drone-canceling solution, 180 Technology®.\u003c\/p\u003e\n\u003cp\u003eAs exhaust gasses exit the 2.4T engine and flow into an AWE 180 Technology®-equipped resonator, they pass through strategically located ports and into reflection chambers. Sound waves carried by these exhaust gasses bounce off the walls of the reflection chambers. By controlling the size and location of the ports and chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies.\u003c\/p\u003e\n\u003cp\u003eFull-bodied aggression remains behind the driver, and complete comfort is achieved in the cabin at cruising speeds, all while unlocking a superior soundtrack and optimal flow compared to stock.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cbr\u003e100% emission-friendly: \u003c\/h4\u003e\n\u003cp\u003eThe 0FG Exhaust does not interfere with any factory emissions equipment.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cbr\u003eMade in PA, USA: \u003c\/h4\u003e\n\u003cp\u003eEngineered, designed, and manufactured in-house at AWE.\u003c\/p\u003e\n\u003ch4\u003e\n\u003cbr\u003eThe fine print: \u003c\/h4\u003e\n\u003cp\u003eAWE’s Perfect Fitment Guarantee, No CEL Guarantee, and Lifetime Warranty all come standard.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"AWE","offers":[{"title":"Default Title","offer_id":46976507281577,"sku":"3015-28056","price":1195.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/3015-28056_24_jpg.webp?v=1775593145"},{"product_id":"magnaflow®-2025-2026-toyota-4runner-2-4l-overland-series™-cat-back-performance-exhaust-system-19657","title":"MagnaFlow® 2025-2026 Toyota 4Runner 2.4L Overland Series™ Cat-Back Performance Exhaust System 19657","description":"\u003cdiv class=\"pdp__accordion\" data-pdp-details=\"\"\u003e\n\u003cdiv class=\"pdp__accordion-content pdp__accordion-content--description color-body\"\u003e\n\u003cdiv id=\"description\" class=\"rte\" data-pdp-details-text=\"\" aria-hidden=\"false\"\u003eThe MagnaFlow® Toyota 4Runner Overland Series™ Cat-Back Performance Exhaust System #19657 is engineered for off-road function and built to explore further. This Toyota 4Runner exhaust system is designed for the 2025-2026 Toyota 4Runner equipped with the L4 2.4L GAS engine. The high clearance exhaust design of this kit is intended to keep your truck clear of any challenging terrain or obstacles you may come across. #19657 3” diameter mandrel bent main piping passes through an all-new specifically tuned performance oval and round mufflers with No Drone Technology (NDT) before exiting in a high-clearance single driver side rear exit style. MagnaFlow® NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19657 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Toyota 4Runner cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty. \u003cbutton disabled type=\"button\" data-pdp-details-button=\"\" data-description-id=\"description\" aria-expanded=\"false\" aria-controls=\"description\" tabindex=\"0\"\u003eRead Less\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp__benefits\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance exit\u003c\/li\u003e\n\u003cli\u003eNo-Drone-Technology allows for a quiet cabin\u003c\/li\u003e\n\u003cli\u003eDyno proven performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Magnaflow","offers":[{"title":"Default Title","offer_id":46983109214377,"sku":null,"price":1064.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/IMG-5896.webp?v=1775996568"},{"product_id":"mbrp-installer-series-exhaust-system-fits-2024-2026-toyota-land-cruiser-2025-2026-4runner-mbr-s5344al","title":"MBRP INSTALLER SERIES EXHAUST SYSTEM  \nFITS 2024-2026 TOYOTA LAND CRUISER, 2025-2026 4RUNNER (MBR-S5344AL)","description":"\u003cdiv\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty aluminized steel construction\u003c\/li\u003e\n\u003cli\u003eMandrel-bent tubing\u003c\/li\u003e\n\u003cli\u003eDyno-proven performance gains\u003c\/li\u003e\n\u003cli\u003eModerate exhaust tone\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant T304 stainless steel exhaust tips\u003c\/li\u003e\n\u003cli\u003eSimple bolt-on installation\u003c\/li\u003e\n\u003cli\u003eLimited 3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"[\u0026amp;_table]:mb-[15px] [\u0026amp;_table]:mt-[15px] [\u0026amp;_table]:bg-white [\u0026amp;_table]:border [\u0026amp;_table]:border-black [\u0026amp;_table]:p-[6px] [\u0026amp;_th]:bg-[#eee] [\u0026amp;_th]:border [\u0026amp;_th]:border-black [\u0026amp;_th]:p-[6px] [\u0026amp;_td]:bg-white [\u0026amp;_td]:border [\u0026amp;_td]:border-black [\u0026amp;_td]:p-[6px]\"\u003e\n\u003ch2 id=\"scrollTarget-description\"\u003eDescription\u003c\/h2\u003e\n\u003cdiv class=\"relative\" data-v-f7b59a5b=\"\"\u003e\n\u003cdiv class=\"\" data-v-f7b59a5b=\"\"\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eFactory exhaust systems are known to be restrictive, limiting performance and decibel levels with small-diameter tubing and oversized mufflers. However, you don’t have to settle! Instead, bring your ride to life with the MBRP Installer Series Exhaust System.\u003c\/p\u003e\n\u003cp\u003eThe MBRP Installer Series Exhaust System brings several benefits over your ride’s factory exhaust, including dyno-proven performance gains. All piping is mandrel bent for maximum airflow, and as we all know, more airflow out of the engine equals more airflow in. The installer series also features high-flow mufflers which improve exhaust flow and increase sound for a throaty, performance-oriented exhaust note.\u003c\/p\u003e\n\u003cp\u003eAll MBRP Installer Series Exhaust Systems are constructed from durable, corrosion-resistant aluminized steel for long service life, even in harsh weather conditions. T-304 stainless steel exhaust tips cap off every system, offering a long-lasting shine and sleek rolled edge.\u003c\/p\u003e\n\u003cp\u003eThe MBRP Installer Series is engineered with DIY mechanics in mind, featuring an entirely bolt-on installation that you can complete in any driveway or garage with conventional hand tools. All systems include in-depth installation instructions and all hardware necessary for installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Mbrp","offers":[{"title":"Default Title","offer_id":47047852720297,"sku":null,"price":587.09,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/IMG-6377.webp?v=1777338667"},{"product_id":"vulcan-series-2-1-2-in-to-3-in-304-stainless-steel-cat-back-exhaust-system-w-black-tip-for-sequoia-2022-2026","title":"Vulcan Series 2-1\/2 IN to 3 IN 304 Stainless Steel Cat-Back Exhaust System w\/ Black Tip For Sequoia 2022-2026","description":"\u003cp\u003e\u003cstrong\u003ePerformance Gains:\u003c\/strong\u003e\u003cbr\u003eThis system produced gains of up to +25 HP and +31 lbs. x Ft. TQ., as measured on our in-house dyno.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2-1\/2 IN - 3 IN 304 Stainless Steel Construction:\u003c\/strong\u003e\u003cbr\u003eThis cat-back exhaust system is constructed of 2-1\/2 IN - 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh-Flow 304 Stainless Steel Muffler:\u003c\/strong\u003e\u003cbr\u003eThis system features a high-flow 304 stainless steel muffler, producing a deep sound.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 IN Diameter Black Exhaust Tip:\u003c\/strong\u003e\u003cbr\u003eFinishing off this exhaust system is a 4 IN diameter black 304 stainless steel exhaust tip. The tip features a laser etched aFe POWER logo for a unique style.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDeep Sound:\u003c\/strong\u003e\u003cbr\u003eThis system produces a deep sound unleashing all available horsepower and torque.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003cbr\u003eUtilizing factory style flanges and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComputer-Aided Design:\u003c\/strong\u003e\u003cbr\u003eState-of-the-art computer-aided design technology is utilized for precise vehicle fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMIG-Welded:\u003c\/strong\u003e\u003cbr\u003e100% MIG-Welded for race-proven strength and durability.\u003c\/p\u003e\n\u003cp\u003eaFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.\u003c\/p\u003e\n\u003cdiv class=\"overview-item emissions-disclaimer\"\u003e\n\u003cstrong class=\"label\"\u003eEMISSIONS DISCLAIMER\u003c\/strong\u003eThis product does not require a CARB EO#.\u003c\/div\u003e\n\u003cdiv class=\"overview-item emissions-disclaimer\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-item emissions-disclaimer\"\u003e\n\u003cul\u003e\n\u003cli\u003eUp to +25 HP and +31 lbs. x Ft. TQ.\u003c\/li\u003e\n\u003cli\u003eConstructed from 2-1\/2 IN - 3 IN Mandrel-Bent 304 Stainless Steel Tubing\u003c\/li\u003e\n\u003cli\u003e4 IN Diameter Black 304 Stainless Steel Exhaust Tip\u003c\/li\u003e\n\u003cli\u003eUtilizes Factory Style Flanges and Hangers for a Secure Fit\u003c\/li\u003e\n\u003cli\u003e100% MIG-Welded for Strength and Durability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"overview-item emissions-disclaimer\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-item emissions-disclaimer\"\u003e\n\u003cstrong class=\"label\"\u003eFITMENT NOTE\u003c\/strong\u003e\u003cspan\u003eOnly Fits TRD Models.\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"overview-item emissions-disclaimer\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003cdiv class=\"overview-item emissions-disclaimer\"\u003e\n\u003cdiv class=\"product attribute afe_global_fitment_summary\" id=\"info-afe_global_fitment_summary\"\u003e\n\u003cdiv class=\"value\"\u003eToyota Sequoia 23-25 V6-3.4L (tt)\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-info-price\"\u003e\n\u003cdiv class=\"product attribute sku\" id=\"info-sku\"\u003e\n\u003cstrong class=\"type\"\u003ePart Number\u003c\/strong\u003e\n\u003cdiv class=\"value\"\u003e49-36068-B\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"overview-item emissions-disclaimer\"\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/div\u003e","brand":"aFe Power","offers":[{"title":"Default Title","offer_id":47065442156713,"sku":null,"price":1331.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/FullSizeRender_4ccc2bb8-bf43-4b2c-9b27-850c593102e5.jpg?v=1778211955"},{"product_id":"magnaflow®-1996-2002-toyota-4runner-3-4l-overland-series™-cat-back-performance-exhaust-system-19538","title":"MagnaFlow® 1996-2002 Toyota 4Runner 3.4L Overland Series™ Cat-Back Performance Exhaust System 19538","description":"\u003cp\u003e\u003cspan\u003eThe MagnaFlow® Toyota 4Runner Overland Series™ Cat-Back Performance Exhaust System #19538 empowers your 1996-2002 Toyota 4Runner overland rig with MagnaFlow®’s deep signature exhaust note and dyno-proven performance. MagnaFlow® #19538 has been weight optimized and designed to provide improved ground clearance thanks to its undercarriage-hugging, mandrel bent 2.5” main piping paired with a no-tip, high-clearance passenger side exit. These features improve ground clearance, departure angles and overall utility. MagnaFlow® exhaust kit #19538 was developed to be compatible with the most common bolt-on aftermarket modifications. The single straight-through muffler is augmented by a quarter-wave NDT resonator, which utilizes MagnaFlow®’s No Drone Technology to cancel out the undesirable frequencies of your Toyota 4Runner. This feature preserves the character of your motor’s exhaust while allowing for long distance highway cruising to overland destinations without dealing with tiresome interior droning noises. Exhaust system #19538 was produced using CNC precision robotic manufacturing, enabling precise fitment and easy, bolt-on installation. The entire exhaust kit features durable, 100% stainless steel construction and is covered by MagnaFlow®’s limited lifetime construction warranty. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance exit\u003c\/li\u003e\n\u003cli\u003eDyno proven performance\u003c\/li\u003e\n\u003cli\u003eNo-Drone-Technology allows for a quiet cabin\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magnaflow","offers":[{"title":"Default Title","offer_id":47069802135721,"sku":null,"price":930.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/IMG-6907.webp?v=1778450058"},{"product_id":"magnaflow-r-1996-2002-toyota-4runner-3-4l-overland-series-cat-back-performance-exhaust-system-19538","title":"MagnaFlow® 1996-2002 Toyota 4Runner 3.4L Overland Series™ Cat-Back Performance Exhaust System 19538","description":"\u003cp\u003e\u003cspan\u003eThe MagnaFlow® Toyota 4Runner Overland Series™ Cat-Back Performance Exhaust System #19538 empowers your 1996-2002 Toyota 4Runner overland rig with MagnaFlow®’s deep signature exhaust note and dyno-proven performance. MagnaFlow® #19538 has been weight optimized and designed to provide improved ground clearance thanks to its undercarriage-hugging, mandrel bent 2.5” main piping paired with a no-tip, high-clearance passenger side exit. These features improve ground clearance, departure angles and overall utility. MagnaFlow® exhaust kit #19538 was developed to be compatible with the most common bolt-on aftermarket modifications. The single straight-through muffler is augmented by a quarter-wave NDT resonator, which utilizes MagnaFlow®’s No Drone Technology to cancel out the undesirable frequencies of your Toyota 4Runner. This feature preserves the character of your motor’s exhaust while allowing for long distance highway cruising to overland destinations without dealing with tiresome interior droning noises. Exhaust system #19538 was produced using CNC precision robotic manufacturing, enabling precise fitment and easy, bolt-on installation. The entire exhaust kit features durable, 100% stainless steel construction and is covered by MagnaFlow®’s limited lifetime construction warranty. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance exit\u003c\/li\u003e\n\u003cli\u003eDyno proven performance\u003c\/li\u003e\n\u003cli\u003eNo-Drone-Technology allows for a quiet cabin\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Magnaflow","offers":[{"title":"Default Title","offer_id":47109148115113,"sku":null,"price":930.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/IMG-6907_e78fdbcd-5e93-4c00-99a6-b2fb0e388e3f.webp?v=1779249064"},{"product_id":"magnaflow-r-2025-2026-toyota-4runner-2-4l-overland-series-cat-back-performance-exhaust-system-19657","title":"MagnaFlow® 2025-2026 Toyota 4Runner 2.4L Overland Series™ Cat-Back Performance Exhaust System 19657","description":"\u003cdiv class=\"pdp__accordion\" data-pdp-details=\"\"\u003e\n\u003cdiv class=\"pdp__accordion-content pdp__accordion-content--description color-body\"\u003e\n\u003cdiv id=\"description\" class=\"rte\" data-pdp-details-text=\"\" aria-hidden=\"false\"\u003eThe MagnaFlow® Toyota 4Runner Overland Series™ Cat-Back Performance Exhaust System #19657 is engineered for off-road function and built to explore further. This Toyota 4Runner exhaust system is designed for the 2025-2026 Toyota 4Runner equipped with the L4 2.4L GAS engine. The high clearance exhaust design of this kit is intended to keep your truck clear of any challenging terrain or obstacles you may come across. #19657 3” diameter mandrel bent main piping passes through an all-new specifically tuned performance oval and round mufflers with No Drone Technology (NDT) before exiting in a high-clearance single driver side rear exit style. MagnaFlow® NDT utilizes passive quarter-wave noise cancellation to minimize the unwanted droning noises that can otherwise occur at highway cruising speeds. Exhaust kit #19657 utilizes a direct-fit, easy to install design that replaces your OEM exhaust system from the catalytic converter on back. This Toyota 4Runner cat-back performance exhaust system is made of durable, corrosion resistant stainless steel and produced using advanced CNC precision robotic manufacturing techniques, all backed by MagnaFlow®’s limited lifetime warranty. \u003cbutton disabled type=\"button\" data-pdp-details-button=\"\" data-description-id=\"description\" aria-expanded=\"false\" aria-controls=\"description\" tabindex=\"0\"\u003eRead Less\u003c\/button\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"pdp__benefits\"\u003e\n\u003cdiv class=\"metafield-rich_text_field\"\u003e\n\u003cul\u003e\n\u003cli\u003eHigh clearance exit\u003c\/li\u003e\n\u003cli\u003eNo-Drone-Technology allows for a quiet cabin\u003c\/li\u003e\n\u003cli\u003eDyno proven performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Magnaflow","offers":[{"title":"Default Title","offer_id":47109155520681,"sku":null,"price":1064.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/IMG-5896_ee1c40f4-c185-410d-8811-df2ef96de54c.webp?v=1779249817"},{"product_id":"awe-exhaust-suite-for-the-gen-4-toyota-tacoma","title":"AWE Exhaust Suite For The Gen 4 Toyota Tacoma","description":"\u003cp\u003e\u003cstrong\u003eRugged where it matters most. Presenting the AWE 0FG Exhaust Suite for the Gen4 Toyota Tacoma:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Hybrid and Non-Hybrid Models\u003c\/li\u003e\n\u003cli\u003e50-state emissions-compliant 3” catback configuration available with rugged high-clearance BashGuard™ or dual 4.5” tips\u003c\/li\u003e\n\u003cli\u003eHandcrafted from CNC mandrel-bent 3\" U.S.-sourced .065” wall T304L stainless steel\u003c\/li\u003e\n\u003cli\u003eBespoke resonated midpipe featuring AWE’s patented drone-canceling 180 Technology® for maximum comfort on the highway\u003c\/li\u003e\n\u003cli\u003eFactory-matched inlet flange for ease of installation\u003c\/li\u003e\n\u003cli\u003eHigh-clearance BashGuard™ configuration ends after the rear axle making it street-legal, and features an extra thick reinforced stainless ring on the outlet, built for bashing\u003c\/li\u003e\n\u003cli\u003e4.5” double-walled slash-cut tips available in chrome silver or diamond black\u003c\/li\u003e\n\u003cli\u003eWheelbase extensions are included with every kit\u003c\/li\u003e\n\u003cli\u003eLess is more: clean, straight-through design maximizes performance\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on, no cutting required\u003c\/li\u003e\n\u003cli\u003eManufactured in-house at AWE\u003c\/li\u003e\n\u003cli\u003eAWE No CEL Guarantee\u003c\/li\u003e\n\u003cli\u003eAWE Perfect Fitment Guarantee\u003c\/li\u003e\n\u003cli\u003eAWE Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e IMPORTANT FITMENT NOTES THAT YOU SHOULD READ:\u003c\/strong\u003e\u003cspan\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/span\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWill not fit Limited i-Force Max model because of the Full-time 4-wheel drive with electronic locking center differential.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNot designed for models with leaf springs.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AWE","offers":[{"title":"BashGuard Only","offer_id":47133769203881,"sku":"015-28254","price":1195.0,"currency_code":"USD","in_stock":true},{"title":"Chrome Silver","offer_id":47133769236649,"sku":"3015-32254","price":1375.0,"currency_code":"USD","in_stock":true},{"title":"Black Tip","offer_id":47133769269417,"sku":null,"price":1375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/3015-32254_10_918886e2-af81-48d4-9400-c7ebf4aa4997_jpg.webp?v=1780216562"},{"product_id":"carven-exhaust-cut-clamp-muffler-replacement-kit-for-tundra-2023","title":"Carven Exhaust Cut \u0026 Clamp Muffler Replacement Kit for Tundra (2022+)","description":"\u003cp\u003e\u003cspan\u003eUpgrade your \u003cstrong\u003e2022-2025 Toyota Tundra\u003c\/strong\u003e with the \u003cstrong\u003eCarven Exhaust Progressive Series Cut \u0026amp; Clamp Muffler Replacement Kit\u003c\/strong\u003e for a deep, powerful exhaust sound. This high-performance kit is designed for easy installation and is engineered to maximize your truck’s exhaust flow and sound. The \"Progressive Series\" provides a lower, deeper tone at idle and cruising speeds, with an aggressive growl during acceleration.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eKey Features:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eHigh-Performance Exhaust Kit\u003c\/strong\u003e: Designed to boost your Tundra’s sound and performance with a lower, deeper tone and aggressive sound during acceleration.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDirect Fitment \u0026amp; Bolt-On Installation\u003c\/strong\u003e: This \u003cstrong\u003eTundra muffler replacement kit\u003c\/strong\u003e is easy to install, requiring no cutting or welding for a seamless fit.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003ePremium Quality Construction\u003c\/strong\u003e: Handcrafted from high-grade stainless steel using TIG welding processes for maximum durability and long-lasting performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eFits 2022-2025 Toyota Tundra\u003c\/strong\u003e: Compatible with Crew Cab (5.5’ \u0026amp; 6.5’ beds) and Access Cab with Regular Bed models.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eDoes Not Include Exhaust Tip\u003c\/strong\u003e: You can customize your exhaust look with your preferred tip style.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e: Proudly handcrafted in the USA for superior quality and performance.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eVehicle Fitment:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e2022-2025 Toyota Tundra\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCrew Cab 5.5' Short Bed \/ 6.5' Long Bed\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAccess Cab with Regular Bed\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThe Carven Exhaust Direct Fit Muffler Replacement Kit Includes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 Tube Cut Required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSingle Tail Pipe Exit\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDirect Fit \u0026amp; Bolt-On Installation\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eGet the aggressive tone and improved exhaust performance your \u003cstrong\u003e2022-2025 Toyota Tundra\u003c\/strong\u003e deserves with the \u003cstrong\u003eCarven Exhaust Progressive Series Muffler Replacement Kit\u003c\/strong\u003e. Enhance your truck’s sound today!\u003c\/span\u003e\u003c\/p\u003e","brand":"Carven Exhaust","offers":[{"title":"Default Title","offer_id":47134640505001,"sku":"CT1012","price":629.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/CF1014.png-2.webp?v=1780257783"},{"product_id":"borla-atak-catback-exhaust-system-w-black-chrome-tips-2022-2026-toyota-tundra","title":"Borla Atak Catback Exhaust System W\/Black Chrome Tips | 2022-2026 Toyota Tundra","description":"\u003cp\u003eIncludes Hybrid models. Will NOT fit with optional electric bed step. This 2.5\" diameter Cat-Back™ system features a True Dual design with two full tail pipes (Not just a single tail pipe with dual tips) that is unique in the industry. It was designed specifically for the Tundra 3.4L. The system features the aggressive BORLA® ATAK® muffler and Polyphonic Harmonizer Technology inside the muffler assembly which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound without any drone. The system also features a Merge X-Pipe for increased performance and improved sound. The system is finished off with single 4.5\" round black chrome on T-304 stainless steel tips on each tail pipe. Using BORLA® Stainless Steel Polish p# 21499 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. Systems with bright chrome on T-304 stainless steel tips, and carbon fiber tips are also available. Add Extension Pipes 60734 for Crew Cab with Standard Bed (6' 6\") 157.7\" Wheelbase vehicles. Add Extension Pipes 60735 for Extended Cab with Long Bed (8' 1\") 164.6\" Wheelbase vehicles. It is built with premium, high-quality austenitic T-304 stainless steel for a sharp appearance and long life. Our computer numerical control (CNC) manufacturing techniques ensures accurate fit and maximum performance. Mandrel bends ensure maximum flow \u0026amp; power.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBest of all, BORLA® stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eSystem Features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCat-Back™ Exhaust System\u003c\/li\u003e\n\u003cli\u003e2.5\" True Dual Design\u003c\/li\u003e\n\u003cli\u003eATAK® Sound Level\u003c\/li\u003e\n\u003cli\u003eNo Drone\u003c\/li\u003e\n\u003cli\u003ePolyphonic Harmonizer Technology\u003c\/li\u003e\n\u003cli\u003eDual 4.5\" Round Black Chrome On T-304 Stainless Steel Tips\u003c\/li\u003e\n\u003cli\u003eT-304 Stainless Steel\u003c\/li\u003e\n\u003cli\u003eMillion-Mile Warranty\u003cmeta charset=\"UTF-8\"\u003e\n\u003cdiv class=\"fits-vehicles\"\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003cdiv class=\"fits-vehicles\"\u003e\n\u003cstrong\u003eFits these Vehicles:\u003c\/strong\u003e\n\u003cp\u003e2022-2026 Toyota Tundra 3.4L V6 (Includes Hybrid Models) Automatic Transmission 2\/ 4 Wheel Drive Extended (Double) Cab With Standard Bed (6' 6\") 145.7\" Wheelbase\/ Crew (CrewMax) Cab With Short Bed (5' 6\") 145.7\" Wheelbase. BORLA® System Is A True Dual Design. Add Extension Pipes 60734 for Crew Cab with Standard Bed (6' 6\") 157.7\" Wheelbase vehicles. Add Extension Pipes 60735 for Extended Cab with Long Bed (6' 1\") 164.6\" Wheelbase Vehicles.\u003c\/p\u003e\n\u003ctable class=\"table width-auto text-center\"\u003e\n\u003cthead class=\"thead-light\"\u003e\n\u003ctr\u003e\n\u003cth\u003ePIPE DIAMETER\u003c\/th\u003e\n\u003cth\u003eTIP SIZE\u003c\/th\u003e\n\u003cth\u003eTIP EXIT\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd class=\"measurement-label\" id=\"measurement1\"\u003e2.5\"\u003c\/td\u003e\n\u003ctd class=\"measurement-label\" id=\"measurement2\"\u003e4.5\"\u003c\/td\u003e\n\u003ctd class=\"measurement-label\" id=\"measurement3\"\u003eTruck Side Exit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"video-popup\"\u003e\n\u003cdiv class=\"video-swiper\"\u003e\n\u003cdiv class=\"popup\" role=\"alert\"\u003e\n\u003cdiv class=\"popup-container\"\u003e\n\u003ca href=\"https:\/\/www.borla.com\/products\/toyota-tundra-cat-back-exhaust-system-140940bc#0\" class=\"popup-close img-replace\"\u003e\u003c\/a\u003e\u003ciframe width=\"100%\" height=\"550\" src=\"https:\/\/www.youtube.com\/embed\/PcyIBEt1xV8\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-info-price\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Borla Exhaust","offers":[{"title":"Default Title","offer_id":47134664949929,"sku":"140940BC","price":2186.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/IMG-8032.jpg?v=1780260064"},{"product_id":"mbrp-s5301al-cat-back-exhaust-for-2022-2026-toyota-tundra-3-4l","title":"MBRP S5301AL Cat-Back Exhaust for 2022-2026 Toyota Tundra 3.4L","description":"\u003ch2 class=\"tw-font-bold tw-font-roboto-slab tw-text-xl tw-mb-5\"\u003eMBRP Cat-Back Exhaust S5301AL Details\u003c\/h2\u003e\n\u003cdiv class=\"tw-my-10 tiny-mce\"\u003e\n\u003cp\u003eMBRP Cat-Back Exhausts offer a high-quality North American-made full exhaust that will help your vehicle make more power and torque while reducing operating temperatures and increasing exhaust flow. Replacing all of your OEM exhaust after the catalytic converters, everything in the MBRP exhaust kit is direct fit to the factory hangers, and the complete kit comes with all the clamps, brackets and parts you'll need in one box for an easy installation. MBRP is one of the top performance exhaust companies and they leverage their scale and manufacturing expertise to deliver an exceptional product at a phenomenal price point. And they offer the best customer support in the industry, always standing behind their products 100%!\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eMBRP Armor Lite Series with Aluminized Steel\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3.0” Mandrel-Bent Tubing\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e4.0\" Single Wall Angle Cut Mirror-Polished T304 Stainless Steel Exhaust Tip\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMBRP \"Street Profile\" - Aggressive Sound at Full Throttle But Not Obnoxious on Long Drives\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eOutflows Factory Exhaust by 25%\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBolt-On Installation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e3 Year Manufacturer’s Warranty\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"Mbrp","offers":[{"title":"Default Title","offer_id":47226102710441,"sku":"S5301AL","price":754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/FullSizeRender_e8d37307-9d31-4e20-986a-a3cec92ed78d.jpg?v=1782583444"}],"url":"https:\/\/yota-wolf.com\/collections\/exhausts.oembed?page=2","provider":"YotaWolf","version":"1.0","type":"link"}