{"product_id":"toyota-tundra-bed-bars-xbrs-low-profile-truck-bed-cross-bars","title":"Toyota Tundra Bed Bars | XBRS Low-Profile Truck Bed Cross Bars","description":"\u003cp\u003e\u003cstrong\u003eFits 2000–2006, 2007–2021 and 2022–2026 Toyota Tundra.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eLow-profile Toyota Tundra bed bars that grow into a full bed rack.\u003c\/h2\u003e\n\u003cp\u003eXBRS truck bed cross bars sit just above your bed rails. Haul gear, mount accessories and keep using most tonneau covers. When your build grows, XBRS converts into a full XTR1 bed rack, and from there into an XTR3 (see Upgrade to a full bed rack below).\u003c\/p\u003e\n\u003ch3\u003eWhat you can carry on XBRS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRooftop tent:\u003c\/strong\u003e mount it with the XTR Rooftop Tent Brackets (choose XBRS at checkout). Parked, XBRS is rated to 1,500 lb, enough for the tent and the people sleeping in it, and the bed below stays free for gear.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKayaks, paddleboards and surfboards:\u003c\/strong\u003e lay them on the bars and strap them down, so they ride above the bed and your tonneau cover. Boats longer than the bed hang past the tailgate; to carry them over the cab, upgrade to a cab-height XTR1 (see below).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBikes, skis and fishing rods:\u003c\/strong\u003e bolt your carrier into the T-slots with 5\/16-18 drop-in T-nuts. No drilling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecovery and trail gear:\u003c\/strong\u003e carry a shovel, axe or traction boards on XTR Quick Fist Riser Mounts and a Hi-Lift jack on XTR Hi-Lift Jack Mounts. Smaller gear goes on the XBRS Tread MOLLE Plate (8H).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLights and antennas:\u003c\/strong\u003e bolt light pods, a light bar or an antenna mount into the T-slots, and run the wiring along the bars with T-Slot Zip Clips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJobsite loads:\u003c\/strong\u003e ladders, lumber, pipe and conduit ride on the bars while tools stay in the bed, under your tonneau cover if you run one. Flag anything that hangs past the tailgate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eBuilt from the same parts as our bed racks\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e6061-T6 aluminum T-slot extrusion with a black powder coat\u003c\/li\u003e\n\u003cli\u003eCNC-machined corner brackets, the same ones used on XTR1 and XTR3 racks\u003c\/li\u003e\n\u003cli\u003eFull-length T-slots for lights, recovery boards, antennas, bike mounts and MOLLE panels\u003c\/li\u003e\n\u003cli\u003eTwo heights: 6\" (6H) and 8\" (8H). Pick 8H if you want the XBRS Tread MOLLE Plate\n\u003c\/li\u003e\n\u003cli\u003eMade in the USA: designed and built by Xtrusion Overland in Wichita, Kansas\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose your mount\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Mount:\u003c\/strong\u003e fits under most tonneau covers. The brackets give 3\" of clearance into the bed rail. Some tri-fold covers, and covers that reach farther into the bed rail, won't open fully.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRetrax XR Bedcover Mount:\u003c\/strong\u003e made for trucks with a Retrax XR cover. Want both? Shop Retrax XR covers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e MOLLE plates and top braces. Add the XBRS Tread MOLLE Plate (8H only) or top braces.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccessories that fit XBRS:\u003c\/strong\u003e XBRS Tread MOLLE Plate (8H only), XTR Quick Fist Riser Mounts, XTR Grab Handle Kit and T-Slot Zip Clips. All mount in the XBRS T-slots.\u003c\/p\u003e\n\u003ch2\u003eUpgrade to a full bed rack\u003c\/h2\u003e\n\u003cp\u003eXBRS grows in two steps: XBRS to XTR1, then XTR1 to XTR3 whenever you're ready. Every part is sold on its own, so you only buy what each step needs. Open a step to see the parts.\u003c\/p\u003e\n\u003cdetails style=\"border-top: 1px solid rgba(128,128,128,.35);\"\u003e\n\u003csummary style=\"display: flex; justify-content: space-between; align-items: center; gap: 12px; cursor: pointer; list-style: none; padding: 14px 0; font-weight: 600;\"\u003eStep 1: XBRS to XTR1\u003cspan aria-hidden=\"true\" style=\"font-size: 20px; line-height: 1; color: #f26b21;\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003col\u003e\n\u003cli\u003eThe XTR1 Alternate Height Kit for your Tundra (2007 and newer; for a 2000–2006 Tundra, contact us). Choose the \"XTR1 Alternate Height Kit\" option, your rack height (10\" to 26\"), and Wide Width if your XBRS has the Universal Mount or Retrax if it has the Retrax XR mount.\u003c\/li\u003e\n\u003cli\u003eTwo XTR1 Side\/Top Brace Sets: 58\"L for a 5.5' bed or 66\"L for a 6.5' bed. Have an 8' long bed? Contact customer service first.\u003c\/li\u003e\n\u003cli\u003eFour XTR Off-Road Reinforcement Plates. Choose Quantity 4 and the 20° plates (20D Black); the 9° plates are only for the Gladiator.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe kit replaces all of your XBRS bars and raises the rack from 6\" or 8\" to any height from 10\" to 26\". Your corner brackets and bed rail brackets stay on the truck. XBRS bar lengths vary, so we don't offer a part that reuses the old bars.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003cdetails style=\"border-top: 1px solid rgba(128,128,128,.35); border-bottom: 1px solid rgba(128,128,128,.35);\"\u003e\n\u003csummary style=\"display: flex; justify-content: space-between; align-items: center; gap: 12px; cursor: pointer; list-style: none; padding: 14px 0; font-weight: 600;\"\u003eStep 2: XTR1 to XTR3\u003cspan aria-hidden=\"true\" style=\"font-size: 20px; line-height: 1; color: #f26b21;\"\u003e+\u003c\/span\u003e\u003c\/summary\u003e\n\u003cp\u003eAn XTR3 adds a third crossbar and a third upright on each side.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eThe XTR1 to XTR3 Conversion for your Tundra: on the same kit page, choose the \"XTR1 to XTR3 Conversion\" option with the same bracket type and rack height as your XTR1. It includes 1 crossbar, 2 uprights, 2 corner brackets and the bed rail hardware.\u003c\/li\u003e\n\u003cli\u003eSide\/top braces: the conversion doesn't include them. Cut and tap your XTR1 braces to fit (the kit page explains how), or order XTR3 Side\/Top Brace Sets in the same length as your XTR1 braces.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions, or want to go straight from XBRS to XTR3?\u003c\/strong\u003e Contact customer service at (316)-330-0024 or \u003ca href=\"mailto:support@xtrusion-overland.com\"\u003esupport@xtrusion-overland.com\u003c\/a\u003e and we'll put the parts together for you. XBRS isn't made in 13°, so it can't convert to a 13° Soft Topper rack.\u003c\/p\u003e\n\u003c\/details\u003e\n\u003ch2\u003eFAQ\u003c\/h2\u003e\n\u003ch3\u003eWhat is a crossbar on a truck?\u003c\/h3\u003e\n\u003cp\u003eA bar that runs side to side across the truck. On a truck bed it mounts to the bed rails, so you can strap down cargo or bolt on accessories without filling the bed.\u003c\/p\u003e\n\u003ch3\u003eAre truck bed cross bars worth it?\u003c\/h3\u003e\n\u003cp\u003eThey are if you want to carry gear above the bed and keep a tonneau cover or a low profile. XBRS starts at $732 and can be upgraded to a full XTR1 bed rack later. Full XTR1 racks start around $1,500.\u003c\/p\u003e\n\u003ch3\u003eWhat is the best cargo bar for a truck bed?\u003c\/h3\u003e\n\u003cp\u003eIt depends on the job. Ratcheting cargo bars brace loads inside the bed. Crossbars like XBRS bolt on top of the rails, so you can mount accessories and carry long items above the bed.\u003c\/p\u003e\n\u003ch3\u003eShould I get bed bars or a full bed rack?\u003c\/h3\u003e\n\u003cp\u003eBed bars if you want a low profile, a tonneau cover and a lower price. A full bed rack if you need to carry loads over the cab, mount MOLLE panels on the sides or add an awning. With XBRS you can start with bars and upgrade to an XTR1 later.\u003c\/p\u003e\n\u003ch3\u003eWill XBRS work with my tonneau cover?\u003c\/h3\u003e\n\u003cp\u003eWith most covers, yes. The Universal Mount gives 3\" of clearance into the bed rail. Some tri-fold covers, and covers that reach farther into the rail, won't open fully. Have a Retrax XR? Choose the Retrax XR Bedcover Mount.\u003c\/p\u003e\n\u003ch3\u003eShould I choose 6H or 8H?\u003c\/h3\u003e\n\u003cp\u003eXBRS comes 6\" tall (6H) or 8\" tall (8H). Choose 8H if you want the XBRS Tread MOLLE Plate, which fits 8H only; choose 6H for the lowest profile. A full XTR1 bed rack runs 10\" to 26\".\u003c\/p\u003e\n\u003ch3\u003eCan I turn XBRS into a full bed rack later?\u003c\/h3\u003e\n\u003cp\u003eYes. Add the XTR1 Alternate Height Kit for your truck, two XTR1 Side\/Top Brace Sets and four 20° XTR Off-Road Reinforcement Plates. The kit replaces all of the XBRS bars, taking you from 6\" or 8\" tall to anywhere from 10\" to 26\" tall; your corner and bed rail brackets stay on. XBRS bar lengths vary, so we don't offer a part that reuses the old bars. To go on to an XTR3, add the XTR1 to XTR3 Conversion option of the same kit, XTR3 Side\/Top Brace Sets (or cut down your XTR1 braces). XBRS isn't made in 13°, so it can't convert to a 13° Soft Topper rack.\u003c\/p\u003e\n\u003ch3\u003eWill it fit my truck?\u003c\/h3\u003e\n\u003cp\u003eThis listing fits 2000–2006, 2007–2021 and 2022–2026 Toyota Tundra. Pick your year range.\u003c\/p\u003e\n\u003ch3\u003eWhat accessories fit XBRS?\u003c\/h3\u003e\n\u003cp\u003eQuick Fist riser mounts for tools, the XTR Grab Handle Kit, T-Slot Zip Clips for wiring, and the XBRS Tread MOLLE Plate (8H only). They all mount in the XBRS T-slots, no drilling into the bars.\u003c\/p\u003e\n\u003ch3\u003eHow much weight can XBRS carry?\u003c\/h3\u003e\n\u003cp\u003eUp to 1,500 lb static (parked), 800 lb on-road and 400 lb off-road.\u003c\/p\u003e\n\u003ch3\u003eCan I put a rooftop tent on XBRS?\u003c\/h3\u003e\n\u003cp\u003eYes. Mount it with the XTR Rooftop Tent Brackets and choose XBRS at checkout. XBRS is rated to 1,500 lb parked, enough for the tent and the people sleeping in it. On the road, keep everything on the bars, tent included, under 800 lb, or 400 lb off-road.\u003c\/p\u003e\n\u003ch3\u003eDo I have to drill to install XBRS?\u003c\/h3\u003e\n\u003cp\u003eNo. XBRS is a no-drill install.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuestions?\u003c\/strong\u003e Email \u003ca href=\"mailto:support@xtrusion-overland.com\"\u003esupport@xtrusion-overland.com\u003c\/a\u003e or call (316)-330-0024 and we'll help you spec your setup.\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cstrong\u003eMade in the USA\u003c\/strong\u003e by Xtrusion Overland in Wichita, Kansas.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eXBRS is a product of Xtrusion Overland. Original listing: xtrusion-overland.com\u003c\/em\u003e\u003c\/p\u003e","brand":"Xtrusion Overland","offers":[{"title":"6H \/ UNIVERSAL MOUNT \/ 2000-2006","offer_id":51768472666281,"sku":"X01-XBRS-TUND-A-WDW-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"6H \/ UNIVERSAL MOUNT \/ 2007-2021","offer_id":51768472699049,"sku":"X01-XBRS-TUND-B-WDW-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"6H \/ UNIVERSAL MOUNT \/ 2022-2026","offer_id":51768472731817,"sku":"X01-XBRS-TUND-C-WDW-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"6H \/ RETRAX XR BEDCOVER MOUNT \/ 2000-2006","offer_id":51768472764585,"sku":"X01-XBRS-TUND-A-RTX-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"6H \/ RETRAX XR BEDCOVER MOUNT \/ 2007-2021","offer_id":51768472797353,"sku":"X01-XBRS-TUND-B-RTX-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"6H \/ RETRAX XR BEDCOVER MOUNT \/ 2022-2026","offer_id":51768472830121,"sku":"X01-XBRS-TUND-C-RTX-6H","price":732.0,"currency_code":"USD","in_stock":true},{"title":"8H \/ UNIVERSAL MOUNT \/ 2000-2006","offer_id":51768472862889,"sku":"X01-XBRS-TUND-A-WDW-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"8H \/ UNIVERSAL MOUNT \/ 2007-2021","offer_id":51768472895657,"sku":"X01-XBRS-TUND-B-WDW-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"8H \/ UNIVERSAL MOUNT \/ 2022-2026","offer_id":51768472928425,"sku":"X01-XBRS-TUND-C-WDW-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"8H \/ RETRAX XR BEDCOVER MOUNT \/ 2000-2006","offer_id":51768472961193,"sku":"X01-XBRS-TUND-A-RTX-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"8H \/ RETRAX XR BEDCOVER MOUNT \/ 2007-2021","offer_id":51768472993961,"sku":"X01-XBRS-TUND-B-RTX-8H","price":754.0,"currency_code":"USD","in_stock":true},{"title":"8H \/ RETRAX XR BEDCOVER MOUNT \/ 2022-2026","offer_id":51768473026729,"sku":"X01-XBRS-TUND-C-RTX-8H","price":754.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1151\/3001\/files\/xbrs-crossbar-kit-for-toyota-tundra-xtrusion-overland-9025425.png?v=1794962182","url":"https:\/\/yota-wolf.com\/products\/toyota-tundra-bed-bars-xbrs-low-profile-truck-bed-cross-bars","provider":"YotaWolf","version":"1.0","type":"link"}