• Easy to install
• Comes with alignment strips
• Sold as a left and right pair

2024 Land Cruiser American Flag Fender Decals 

Install these fender flags to show off your pride.  Sure this is a Japanese vehicle, but you're an American.  We also have a long history of cooperation with the Japanese so don't fret.  Install them today.

Topped with UV laminate.  Available in gloss or matte.  Can be used in other locations.  One flag is reversed for the passenger side.  Never retreat!

Model

Black and Clear - This is printed on clear vinyl.  Your paint will fill in the clear portions.  This works well on all vehicle colors MINUS black and any other very dark colors.

Features

• TruProtect - UV Resistant Laminate
• TruPrint - Authentic Roland inks and printers
• Made in the USA

Instructions

Install in 70+ degree weather.  If it is very warm and sunny, make sure you are in the shade.

Items you may want to have:

• Detail Spray (without wax) or glass cleaner
• Microfiber Towel
• StickerFab Application Fluid or dish with soapy water (few drops of dish soap + 1-2 cups of water)
• Felt Lined Squeegee

Clean the application area to prepare it for installation.  Do not use a spray with any type of wax in it.

A wet installation is recommended.  Use slightly soapy water on the back of the vinyl alignment strips or our StickerFab Application Fluid.  Also wet the fender.  This will allow you to move the vinyl around and find the correct alignment.  See our photos.  We placed a strip below the indentation on the fender and the second alignment strip vertically at the back of the fender.  You can use your fingers to push out the water as this is just a temporary install for the strips.

Now wet the back of the flag and align it properly using the strips as a guide.  Wet the fender again.  Once aligned, use a felt tip squeegee to push out the water/air.  Allow the vinyl to dry.