AMP RESEARCH POWERSTEP FITS 2022-2025 TOYOTA TUNDRA (AMP-76338-01A)
- In stock, ready to ship
- Backordered, shipping soon
- Boards will need to be trimmed on Tundra Double Cab
- Drilling is required for installation
- NOTE: Stock levels change regularly. If your product is unavailable, please call or chat to verify inventory.
- Replacement Parts: 19-04932-97L, 19-04280-STA, 75145-01A, 80-04868-90, 19-04894-91, 76405-01A, 20-03752-85
Features
- The original power-retractable running boards
- Premium, single-motor design automatically deploys and retracts boards
- Corrosion-resistant die-cast aluminum construction
- Military-grade black PTFE coating
- 6-inch wide, cab-length steps
- Textured, slip-resistant step surface
- Low-profile integrated LED courtesy lights
- Optional Override Switch is available for manual control
- Includes vehicle-specific installation guide and mount kit
- Mounts to vehicle’s rocker panel
- Newer applications connect to OBDII port via Plug-N-Play module
- Professional installation recommended
Order Notes
Cleaning your PowerStep In adverse conditions, debris such as mud, dirt, and salt may become trapped in the running board mechanism, possibly leading to unwanted noise, or binding.
Prepare for cleaning Manually set the running boards to deploy: The running boards can be manually set in the deployed position by opening the door, and then place your foot on the step. Leave firm pressure with your foot on the step while you close the door. This will leave your steps in the deployed position.
How to maintain your steps: Using a pressure washer to clean the front and rear linkages which are all 4 hinge points for your PowerSteps. Avoid spraying the motors directly.
After washing, apply silicone spray (dry Film lubricant) only, to all 4 linkage arms and all pivot pins, some of these pins will be located up high on the linkage arm as well. Then cycle the door to work the lubrication in to the hinge points.
Do not apply silicone, wax, or protectants like Armor All® to the running board. Do not lubricate with any greases, oils, WD-40, or penetrants.
This cleaning should be done periodically, or when debris such as mud, dirt or salt becomes trapped in the running board mechanism.